On Monday, 9 January 2017 08:38:12 UTC-5, Unman wrote: > On Mon, Jan 09, 2017 at 01:12:38PM +0100, Alex wrote: > > On 01/09/2017 01:03 PM, Bernhard wrote: > > > Hello, I am not expert, but often such differences are explained by > > > the following calculation: 1 KB is 2^10 = 1024 bytes and not 1000. > > > While this difference is little, in third power it becomes big: 2^30 > > > * 53= 56,908,316,672 so *real* 53 GiB are approx 60 * 10^6 bytes > > > which sometimes are called GB al well ... Bernhard > > > > > > On 01/09/2017 12:02 PM, dumbcyber wrote: > > >> I built Qubes on a 64Gb USB stick. I then successfully cloned the > > >> stick to an external SSD drive using Clonezilla. The SSD drive is > > >> 500Gb in total size. > > >> > > >> As a result my /dev/mapper/qubes_dom000-root on the SSD is only > > >> 53Gb in total size according to "df -h" in dom0. > > >> > > >> I used gparted on another linux machine to extend the size of this > > >> partition (qubes_dom000) to the full size available. Gparted then > > >> shows 57Gb used and 360Gb free. > > >> > > >> I boot off the SSD into Qubes and run "df -h" again but it still > > >> shows only 53G total size. > > >> > > >> Is there a "right" way to extend the size of > > >> /dev/mapper/qubes_dom000-root, if in fact its at all possible? > > >> > > >> Thanks in advance. > > >> > > > > > The problem here is not the rounding (yes, usb pen drives are usually > > measured with the SI interpretation of the multiplication prefixes) but > > the enlargement of the filesystem. > > > > dumbcyber wrote that he correctly adjusted the partition size, but > > that's not enough; the filesystem on it has to be resized as well. > > > > I'm not an expert with lvm either, but online guides can be found on > > resizing LVM volumes and filesystems... > > > > -- > > Alex > > > > Assuming that the LV has been succesfully resized then resize2fs is what > you need.
Thanks, ran this from dom0 and worked fine. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/cfeaf6e0-bfb8-4c9a-be4f-ce22a87e45d3%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
