On Saturday, March 4, 2017 at 8:06:55 PM UTC-5, Francesco wrote: > On Sat, Mar 4, 2017 at 5:14 PM, <raah...@gmail.com> wrote: > > > On Saturday, March 4, 2017 at 10:18:18 AM UTC-5, Francesco wrote: > > > Hello, > > > for the first time I am trying this new feature of Qubes 3.2 with the idea > > of using attaching a scanner to a scannerVM. > > > > > > Fist installed qubes-usb-proxy and simple-scan in the template from which > > both sys-usb and scannerVM depend. > > > > > > Then connected the usb cable and the scanner appeared in sys-usb terminal: > > > user@sys-usb:~$ lsusb > > > Bus 003 Device 005: ID 04a9:190f Canon, Inc. > > > but > > > it does not show in dom0 with > > > qvm-usb > > > as taught at the end of this document: > > > https://www.qubes-os.org/doc/usb/ > > > In fact only the webcam appears there. > > > > > > > > > So which is the difference between webcam and scanner? Perhaps that the > > webcam was already installed at boot, while the scanner was connected > > after? But from a security point of view is it advisable to boot with the > > scanner already connected? > > > Best > > > Fran > > > > did you install proxy in the usb vm too?> > > > yes > not sure havent; tried with a scanner only printer. I still print and scan > over network with a raspberry pi that i set up on earlier version of Qubes. > > > That may be a cleaner way to do that > > I;ve gotten android phone to work as single usb device though too. maybe > scanner use some diff protocol or port? > > > > May be, but it seems strange that qvm-usb does not see it > > Best > > Fran > > > > > > -- > > You received this message because you are subscribed to the Google Groups > "qubes-users" group. > > To unsubscribe from this group and stop receiving emails from it, send an > email to qubes-users...@googlegroups.com. > > To post to this group, send email to qubes...@googlegroups.com. > > To view this discussion on the web visit > https://groups.google.com/d/msgid/qubes-users/5fe54565-d6f7-4aa3-a61d-28ed0e0cefbb%40googlegroups.com. > > For more options, visit https://groups.google.com/d/optout.
did it work with it plugged in at boot? -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/99c1aacc-d9c2-43ec-b11f-24279246a61c%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
