>From https://www.qubes-os.org/doc/thinkpad-troubleshooting/:
Instructions for getting your Lenovo 450 laptop working with Qubes/Linux
Lenovo 450 uses UEFI, so some settings are needed to get Qubes (or Fedora) to
boot, otherwise Qubes install USB stick will reboot right after boot selector
screen and not continue install.
Setting UEFI options to get Qubes install to boot
Enable Legacy USB mode
Disable all Secure Boot and UEFI options, but leave this enabled: Config /
USB / USB UEFI BIOS SUPPORT
Save settings and reboot
Install Qubes
… and now enjoy :) These settings may be needed also in other UEFI computers.
Does this mean the installation will be legacy? I installed via this method (on
a T470) and the computer will not begin to boot except in legacy mode.
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To post to this group, send email to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/qubes-users/1436c0a4-3252-4d8c-9503-95ed8832be97%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
