Den tirsdag den 5. september 2017 kl. 19.58.50 UTC skrev Mark Eubanks: > On Tuesday, September 5, 2017 at 12:06:28 PM UTC-4, Mark Eubanks wrote: > > Can someone explain why I can start the work VM but when I start the > > personal I get the ERROR: insufficient mem . Even though the memory > > settings are the same > > > > > > thanks > > Ok.. you can ignore my newb Qubes questions
Did you find out why? If not, it's due to limited RAM on your system, if you have scarce amount, you need to jungle a bit to make sure you never run out. I.e. on my 8GB laptop, I need to shutdown some AppVM's every now and then to make room for more memory for other AppVM's. In contrast, on my 32GB RAM desktop, I never, ever, worry about RAM. So basically, the less RAM you have, and the more RAM you need, the more you need to balance which AppVM you have running. btw Mark, I noticed it isn't the first time, but give it a day or two for answers. While Qubes is getting more and more popular, there aren't too many people around here. It gets worse since Qubes has many different forums/IRC/mail-posts/etc. so among the Qubes users that are, many are spread out. It will often take time to get answers. So, no need to worry. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/f55da546-36fe-4f6f-b8dd-a41947f5cf44%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
