On Wednesday, November 22, 2017 at 9:11:18 PM UTC, beso wrote: > On Wednesday, November 22, 2017 at 5:48:43 PM UTC+2, beso wrote: > > On Wednesday, November 22, 2017 at 3:00:41 PM UTC+2, beso wrote: > > > On Monday, October 2, 2017 at 2:06:38 PM UTC+3, beso wrote: > > > > On Monday, October 2, 2017 at 12:01:41 AM UTC+3, One7two99 wrote: > > > > > Hello Beso, > > > > > > > > > > > Mobile Broadband is enabled in > > > > > > NetworkManager Applet. > > > > > > I can create new Mobile Broadband > > > > > > connection but it keeps connecting > > > > > > and nothing else > > > > > > > > > > I am using mobile broadband within Qubes and am happy to help, but > > > > > honestly your question/problem is to unqualified. > > > > > > > > > > - what version of Qubes are you running? > > > > > - what modell of mobile broadband card are you using? > > > > > - how is the broadband card connected? Probably as an internal USB > > > > > device. > > > > > - are you using sys-usb to connect the card to your sys-net VM? Or > > > > > are you passing through the whole USB controller? > > > > > - have you tried to boot up a Fedora live Linux and check if your > > > > > mobile broadband is working there? > > > > > - what does "keeps connecting" means? > > > > > > > > > > My suggestion: > > > > > Try to get the mobile broadband card working without Qubes (Linux > > > > > Live Boot from USB-Stick). > > > > > If you got it working try to make it work in Qubes. > > > > > > > > > >  > > > > > > > > - Laptop is ThinkPad X1 Carbon 4th gen. > > > > - Qubes release 3.2(R3.2) > > > > - Previous linux distros worked (ubuntu 16.04) > > > > - from qvm-usb I can see that card is: Sierra Wireless Incorporated > > > > Sierra Wireless EM7455 Qualcomm Snapdragon X7 > > > > - do I have to attach it somewhere? > > > > - As I mentioned I can create new broadband connection and even select > > > > it from applet menu but it keeps connecting(applet shows "circles" as > > > > trying connect). > > > > I am trying to make screenshot if it helps > > > > PS. > > [user@sys-net ~]$ ifconfig > > enp0s1f6: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 > > ether 54:ee:75:aa:4d:e3 txqueuelen 1000 (Ethernet) > > RX packets 0 bytes 0 (0.0 B) > > RX errors 0 dropped 0 overruns 0 frame 0 > > TX packets 0 bytes 0 (0.0 B) > > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > device interrupt 26 memory 0xe1200000-e1220000 > > > > lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 > > inet 127.0.0.1 netmask 255.0.0.0 > > inet6 ::1 prefixlen 128 scopeid 0x10<host> > > loop txqueuelen 1 (Local Loopback) > > RX packets 636 bytes 74412 (72.6 KiB) > > RX errors 0 dropped 0 overruns 0 frame 0 > > TX packets 636 bytes 74412 (72.6 KiB) > > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > > > vif2.0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 > > inet 10.137.1.1 netmask 255.255.255.255 broadcast 0.0.0.0 > > inet6 fe80::fcff:ffff:feff:ffff prefixlen 64 scopeid 0x20<link> > > ether fe:ff:ff:ff:ff:ff txqueuelen 32 (Ethernet) > > RX packets 102007 bytes 32168371 (30.6 MiB) > > RX errors 0 dropped 0 overruns 0 frame 0 > > TX packets 228493 bytes 219299357 (209.1 MiB) > > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > > > wlp0s2: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 > > inet 192.168.43.181 netmask 255.255.255.0 broadcast 192.168.43.255 > > inet6 fe80::e6a4:71ff:fe8a:d310 prefixlen 64 scopeid 0x20<link> > > ether e4:a4:71:8a:d3:10 txqueuelen 1000 (Ethernet) > > RX packets 238240 bytes 225553537 (215.1 MiB) > > RX errors 0 dropped 0 overruns 0 frame 0 > > TX packets 108834 bytes 37072683 (35.3 MiB) > > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > > sudo dmesg: > [ 3847.841147] NetworkManager: segfault at 38 ip 0000732046957569 sp > 00007ffe0cc871f0 error 4 in libnm-wwan.so[732046950000+11000]
Also, if you have multiple of USB controllers, try sacrifice one controller to sys-net, while keeping the remaining in sys-usb. I believe you have a laptop since you want to use an USB modem, but even laptops tend to have at least two USB controllers now a days and some years back. So verify how many USB controllers you got (NOT! ports, but controllers, that is to be blond, how many USB controlling chips are there in your hardware). Many developers like to put multiple of ports on a single controller. Be sure you got more than one controller, and then only pass one of them to your sys-net, and keeping the other in sys-usb. Then in practice, avoid any USB ports used for the exposed USB controller, and then keep remaining USB controllers in the safer sys-usb. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to email@example.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/61768898-70d9-4ca4-a6e0-5285506762a6%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.