I saw this reply only yesterday, unfortunately. So, I followed your suggestion and looked around. I found this, that should do exactly what you say: https://cwcode.wordpress.com/2014/01/14/compiling-a-new-kernel-module-to-use-hid-core-for-a-wacom-bamboo-pad/
Now, since this guide is not for fedora, I wanted to try something easier before. In the comments someone says "I found it easier to add usbhid.quirks=0x056a:0x0318:0x40000000 to the kernel commandline in /etc/default/grub. 0x40000000 is HID_QUIRK_NO_IGNORE. The first two numbers is the device’s ID." So I tried to do the same. I clone the template-vm on which sys-usb is based and I added in /etc/default/grub usbhid.quirks=0x056a:0x00dd:0x40000000 where 056a identifies wacom as producer and 00dd is my product number, found in /sys/kernel/debug/usb/devices. When I rebooted nothing happened. I also tried to put this line in grub.qubes, with no success whatsoever. Then I tried following the guide, but I fail pretty quicly: Trying to remove /lib/modules/4.9.56-21.pvops.qubes.x86_64/kernel/drivers/input/tablet/wacom_serial4.ko Gives me the error /lib/modules/4.9.56-21.pvops.qubes.x86_64/kernel/drivers/input/tablet/wacom_serial4.ko Then I tried at least to monitor usb with usbmon. I gave modprobe usbmon and then started monitoring my wacom tablet, that is on 2u, with: sudo cat /sys/kernel/debug/usb/usbmon/2u usbmon doesn't sense anything when I move the pen on the tablet, it only senses something when I connect/disconnect it. When I connect the tablet I get: ffff8cefcce66540 3453394997 C Ii:2:001:1 0:2048 2 = 0200 ffff8cefcce66540 3453395017 S Ii:2:001:1 -115:2048 4 < ffff8cefca1b00c0 3453395039 S Ci:2:001:0 s a3 00 0000 0001 0004 4 < ffff8cefca1b00c0 3453395053 C Ci:2:001:0 0 4 = 01010100 ffff8cefca1b00c0 3453395057 S Co:2:001:0 s 23 01 0010 0001 0000 0 ffff8cefca1b00c0 3453395067 C Co:2:001:0 0 0 ffff8cefca1b00c0 3453395072 S Ci:2:001:0 s a3 00 0000 0001 0004 4 < ffff8cefca1b00c0 3453395086 C Ci:2:001:0 0 4 = 01010000 ffff8cefca1b00c0 3453422046 S Ci:2:001:0 s a3 00 0000 0001 0004 4 < ffff8cefca1b00c0 3453422064 C Ci:2:001:0 0 4 = 01010000 ffff8cefca1b00c0 3453449146 S Ci:2:001:0 s a3 00 0000 0001 0004 4 < ffff8cefca1b00c0 3453449166 C Ci:2:001:0 0 4 = 01010000 ffff8cefca1b00c0 3453476120 S Ci:2:001:0 s a3 00 0000 0001 0004 4 < ffff8cefca1b00c0 3453476138 C Ci:2:001:0 0 4 = 01010000 ffff8cefca1b00c0 3453503126 S Ci:2:001:0 s a3 00 0000 0001 0004 4 < ffff8cefca1b00c0 3453503155 C Ci:2:001:0 0 4 = 01010000 ffff8cefca1b00c0 3453503256 S Co:2:001:0 s 23 03 0004 0001 0000 0 ffff8cefca1b00c0 3453503279 C Co:2:001:0 0 0 ffff8cefca1b00c0 3453555111 S Ci:2:001:0 s a3 00 0000 0001 0004 4 < ffff8cefca1b00c0 3453555135 C Ci:2:001:0 0 4 = 11010000 ffff8cefca1b00c0 3453607116 S Ci:2:001:0 s a3 00 0000 0001 0004 4 < ffff8cefca1b00c0 3453607141 C Ci:2:001:0 0 4 = 03011000 ffff8cefca1b00c0 3453607152 S Co:2:001:0 s 23 01 0014 0001 0000 0 ffff8cefca1b00c0 3453607162 C Co:2:001:0 0 0 ffff8cefca1b00c0 3453659185 S Ci:2:000:0 s 80 06 0100 0000 0040 64 < ffff8cefca1b00c0 3453659601 C Ci:2:000:0 0 18 = 12010002 00000020 6a05dd00 02010102 0001 ffff8cefca1b00c0 3453659620 S Co:2:001:0 s 23 03 0004 0001 0000 0 ffff8cefca1b00c0 3453659633 C Co:2:001:0 0 0 ffff8cefca1b00c0 3453711790 S Ci:2:001:0 s a3 00 0000 0001 0004 4 < ffff8cefca1b00c0 3453711808 C Ci:2:001:0 0 4 = 11010000 ffff8cefca1b00c0 3453763103 S Ci:2:001:0 s a3 00 0000 0001 0004 4 < ffff8cefca1b00c0 3453763128 C Ci:2:001:0 0 4 = 03011000 ffff8cefca1b00c0 3453763133 S Co:2:001:0 s 23 01 0014 0001 0000 0 ffff8cefca1b00c0 3453763143 C Co:2:001:0 0 0 ffff8cefca1b00c0 3453827084 S Ci:2:006:0 s 80 06 0100 0000 0012 18 < ffff8cefca1b00c0 3453827583 C Ci:2:006:0 0 18 = 12010002 00000020 6a05dd00 02010102 0001 ffff8cefca1b00c0 3453827613 S Ci:2:006:0 s 80 06 0600 0000 000a 10 < ffff8cefca1b00c0 3453827726 C Ci:2:006:0 -32 0 ffff8cefca1b00c0 3453827741 S Ci:2:006:0 s 80 06 0600 0000 000a 10 < ffff8cefca1b00c0 3453827856 C Ci:2:006:0 -32 0 ffff8cefca1b00c0 3453827871 S Ci:2:006:0 s 80 06 0600 0000 000a 10 < ffff8cefca1b00c0 3453828010 C Ci:2:006:0 -32 0 ffff8cefca1b00c0 3453828038 S Ci:2:006:0 s 80 06 0200 0000 0009 9 < ffff8cefca1b00c0 3453828359 C Ci:2:006:0 0 9 = 09023b00 02010080 31 ffff8cefca1b00c0 3453828384 S Ci:2:006:0 s 80 06 0200 0000 003b 59 < ffff8cefca1b00c0 3453829398 C Ci:2:006:0 0 59 = 09023b00 02010080 31090400 00010301 02000921 10010001 22b80007 0581030a ffff8cefca1b00c0 3453829420 S Ci:2:006:0 s 80 06 0300 0000 00ff 255 < ffff8cefca1b00c0 3453829624 C Ci:2:006:0 0 4 = 04030904 ffff8cefca1b00c0 3453829642 S Ci:2:006:0 s 80 06 0302 0409 00ff 255 < ffff8cefca1b00c0 3453830002 C Ci:2:006:0 0 16 = 10034300 54004c00 2d003400 37003000 ffff8cefca1b00c0 3453830023 S Ci:2:006:0 s 80 06 0301 0409 00ff 255 < ffff8cefca1b00c0 3453830594 C Ci:2:006:0 0 30 = 1e035700 61006300 6f006d00 20004300 6f002e00 2c004c00 74006400 2e00 ffff8cefca1b0cc0 3453831094 S Co:2:006:0 s 00 09 0001 0000 0000 0 ffff8cefca1b0cc0 3453831265 C Co:2:006:0 0 0 ffff8cefca1b09c0 3453831876 S Co:2:006:0 s 21 0a 0000 0000 0000 0 ffff8cefca1b09c0 3453831999 C Co:2:006:0 0 0 ffff8cefca1b09c0 3453832023 S Ci:2:006:0 s 81 06 2200 0000 00b8 184 < ffff8cefca1b09c0 3453834969 C Ci:2:006:0 0 184 = 05010902 a1018501 0901a100 05091901 29051500 25019505 75018102 95017503 ffff8cefca68cb40 3453835821 S Co:2:006:0 s 21 09 0302 0000 0002 2 = 0202 ffff8cefca68cb40 3453835999 C Co:2:006:0 0 2 > ffff8cefca68cb40 3453836038 S Ci:2:006:0 s a1 01 0302 0000 0002 2 < ffff8cefca68cb40 3453836198 C Ci:2:006:0 0 2 = 0202 ffff8cefcf2c4900 3453836322 S Co:2:006:0 s 21 0a 0000 0001 0000 0 ffff8cefcf2c4900 3453836418 C Co:2:006:0 -32 0 ffff8cefcf2c4900 3453836433 S Ci:2:006:0 s 81 06 2200 0001 001d 29 < ffff8cefcf2c4900 3453837020 C Ci:2:006:0 0 29 = 0600ff09 80a10285 02750895 3f150026 00108101 85037508 953f8101 c0 ffff8cefca68c240 3453872679 S Ii:2:006:1 -115:2 10 < ffff8cefcea829c0 3453925170 S Ii:2:006:2 -115:2 64 < ffff8cefca68c240 3453977193 C Ii:2:006:1 -2:2 0 ffff8cefcea829c0 3453981181 C Ii:2:006:2 -2:2 0 ...Clearly I have no idea about how to read this. Is it normal that usbmon doesn't sense anything when it comes to the pen moving on the tablet? This doesn't happen for instance with a mouse: usbmon keeps giving me output when I move it. i have to add that the tablet should be working: The blue led on it blinks when I have the pen near to the surface. Depressed regards, Fab -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/111b9db9-24de-4028-be7a-d4600214d17e%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
