On Friday, April 20, 2018 at 11:01:16 AM UTC-7, Campbell wrote: > I have a problem with a Qubes 4 installation on USB that will not boot after > the initial setup. It will restart after initial install, BIOS sees the drive > as USB Qubes, boots into the configuration loader and eventually into the OS. > Once there I can do everything and it all works including my Windows HVM > yesterday. > > But what I thought was a fluke is turning into a real problem. > USB will not boot again if I choose to shut down in the Qubes OS. > > I've now tried this with 2 different size and manufacturer USB drives with > same results. The BIOS sees either drive as simply a USB drive (instead of > showing "USB Qubes") and apparently does not see the boot loader any more. > > Please help!
I just now tried a Qubes 3.2 install and have the same problem. Once I restart after all configuration is done, it never boots again. Computer BIOS sees the disk but there is nothing to load, even though it rebooted successfully during the installation. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/744f7afb-092b-4c53-a265-3afdf050681c%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
