On Saturday, April 21, 2018 at 12:05:05 AM UTC-7, john wrote: > On 04/20/18 14:58, Campbell wrote: > > On Friday, April 20, 2018 at 11:01:16 AM UTC-7, Campbell wrote: > >> I have a problem with a Qubes 4 installation on USB that will not boot > >> after the initial setup. It will restart after initial install, BIOS sees > >> the drive as USB Qubes, boots into the configuration loader and eventually > >> into the OS. Once there I can do everything and it all works including my > >> Windows HVM yesterday. > >> > >> But what I thought was a fluke is turning into a real problem. > >> USB will not boot again if I choose to shut down in the Qubes OS. > >> > >> I've now tried this with 2 different size and manufacturer USB drives with > >> same results. The BIOS sees either drive as simply a USB drive (instead of > >> showing "USB Qubes") and apparently does not see the boot loader any more. > >> > >> Please help! > > > > I just now tried a Qubes 3.2 install and have the same problem. Once I > > restart after all configuration is done, it never boots again. Computer > > BIOS sees the disk but there is nothing to load, even though it rebooted > > successfully during the installation. > > > > so, 1st you tried to install Q4.0 from USB installation media to another > USB drive ? that failed, so then you tried to install Q3.2 from one > USB drive installtion media to another USB drive ? Is that right ? > > and you've seen and followed this ? > -- > Installing to a USB drive > > Installing an operating system onto a USB drive can be a convenient and > secure method of ensuring that your data is protected. Be advised that a > minimum storage of 32 GB is required on the USB drive. This installation > process may take longer than an installation on a standard hard disk. > The installation process is identical to using a hard disk in > conjunction with two exceptions: > > Select the USB as the storage location for the OS. > > Leave the option checked to “Automatically configure my Qubes > installation to the disk(s) I selected and return me to the main menu”. > > --
There is no option in the install script to "Automatically configure my Qubes installation to the disk(s) I selected and return me to the main menu" When I select my disk, there is an option checked for "Automatically partition disk" but nothing like what is written in the documentation. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/a75668d7-9ed2-4ce8-8cd8-e67a44baf63a%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
