On Thu, April 26, 2018 2:26 pm, [email protected] wrote:
> On Wednesday, April 25, 2018 at 10:01:30 PM UTC-7, awokd wrote:
>
>> On Thu, April 26, 2018 12:53 am, Fox Gluv wrote:
>>
>>
>>> libxl_pci.c:1176:libxl__device_pci_reset: The kernel doesn't support
>>> reset from sysfs for PCI device 0000:00:14.0 2018-04-25
>>> 15:08:20.363+0000:
>>> libxl: libxl_pci.c:1095:do_pci_add: Error: xc_physdev_map_pirq
>>> irq=-2147483648: Invalid argument
>>>
>>
>> Try setting it to not require strict reset.
>>
>
> I think it was already set to no-strict-reset. Here's the qvm-pci entry:
> dom0:00_14.0 USB controller: Intel Corporation Wildcat Point-LP USB xHCI
> Controller sys-usb
> (no-strict-reset=True)
>
>
> To be sure I went into Qube Manager, sys-usb->Qubes Setting->Devices and
> used the "Configure strict reset for PCI devices" button to set it on
> 00:14.0. It still did not start up afterwards, and gave the same error
> message.
00:14.0 USB controller: Intel Corporation Wildcat Point-LP USB xHCI
Controller
(rev 03) (prog-if 30 [XHCI])
Subsystem: Lenovo Device 3820
Flags: medium devsel, IRQ -2147483648
The IRQ looks very odd. Check your "xl dmesg" and "sudo journalctl -b" for
errors relating to this device. Maybe check your UEFI config to see if you
can set it to USB 2.0 mode?
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To post to this group, send email to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/qubes-users/a81dfca30552a1acc6a17523403608cb.squirrel%40tt3j2x4k5ycaa5zt.onion.
For more options, visit https://groups.google.com/d/optout.
