On Sat, Dec 15, 2018 at 08:44:48AM +0200, Ivan Mitev wrote: > > > On 12/14/18 12:00 PM, unman wrote: > > On Fri, Dec 14, 2018 at 10:49:22AM +0200, Ivan Mitev wrote: > > > > > > > > > On 12/14/18 9:30 AM, TitanoBOT wrote: > > > > четверг, 13 декабря 2018 г., 21:15:55 UTC+3 пользователь Ivan Mitev > > > > написал: > > > > > On 12/13/18 7:07 PM, TITANBOT wrote: > > > > > > Hello. Forgive me for my bad english. I hope you can understand me. > > > > > > I installed Kali linux in my Qubes OS, but the internet is not > > > > > > working. When I made the kali installation, I needed to enter ip, > > > > > > netmask, gateway and DNS. VM in the settings shows > > > > > > 10.137.0.15 255.255.255.255 10.137.0.6. But when installing, I can > > > > > > not specify the same parameters of the mask under the network. I > > > > > > can specify 255.255.255.0 but this is not true. How to configure > > > > > > the Internet in Qubes OS for Kali linux? I want to note that > > > > > > windows successfully works without any settings. > > > > > > > > > > Assuming 10.137.0.15 is your VM's IP, try the following network > > > > > settings: > > > > > > > > > > ip: 10.137.0.15 > > > > > mask: 255.255.255.0 (/24) > > > > > gateway: 10.137.0.6 > > > > > dns1: 10.139.1.1 > > > > > dns2: 10.139.1.2 > > > > > > > > But I have the address of the subnet mask 255.255.255.255 > > > > Would it be correct to write 255.255.255.0? This is the address I > > > > indicated when installing KALI VM, because 255.255.255.255 showed an > > > > error. > > > > Can you write in more detail? I am a novice Linux user. You can write > > > > commands that I have to enter in order for the Internet to start > > > > working on Kali VM. > > > > > > Sorry, I'm not familiar with Kali Linux. The following doc might help: > > > > > > https://kali.training/topic/configuring-the-network/ > > > > > > Create a wired connection in NetworkManager and try to use default network > > > settings first (eg. dhcp) ; this should work if network PV drivers aren't > > > installed by default in Kali. Otherwise configure a wired connection with > > > manual settings with the ip/... I gave you earlier. > > > > > > Re- netmask: not sure why qubes advertises 255.255.255.255 - it's probably > > > related to PV drivers. Don't worry about it, simply use 255.255.255.0 > > > > > > > > > Hope this helps, > > > Ivan > > > > It's not a driver issue, I think. Unless you want to have interqube traffic > > then > > 255.255.255.255 will work. > > You will need a route to the gateway and set it as default route, but > > you set this manually. > > If the Network tools insist on something other than 255.255.255.255 > > then as Ivan says, use 255.255.255.0 > > Interesting - out of curiosity I tried a network config with a /32 mask in > NetworkManager and it worked, the tool was clever enough to detect that the > gateway wasn't in the subnet and added a route to the gateway through the > outgoing device before setting up the default route. > > So, given that Kali Linux seems to use NetworkManager, the OP's config with > 255.255.255.255 should work. > If I recall Kali wont *allow* 255.255.255.255
-- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/20181215141011.lgc5cxqmilwgscdh%40thirdeyesecurity.org. For more options, visit https://groups.google.com/d/optout.