I was able to make further tests in the time available.
the result did not go well, but some doubts came.

Summary:

QWT (working and correct resolution!)               Ok
UEFI boot                                                       OK
stubdom-linux-rootfs.gz *(only Dom0 starts)       KO*

even with only Dom0 started and giving 12gb Ram the VM windows goes wrong.
with the fix stubdom-linux-rootfs it only works for me Dom0, so I 
immediately restored it.
_________________________________________

I saw that the ATI Radeon card shares the IRQ 16 with these others:

00: 01.0 PCI bridge: Intel Corporation Xeon
00: 1a.0 USB controller: Intel Corporation 7 Series / C216 Chipset Family 
USB Enhanced Host Controller # 2
00: 1c.0 PCI bridge: Intel Corporation 7 Series / C216 Family PCI Express 
Root Port Chipset 1

But if I try to connect one or all the devices to the HVM, these (besides 
the vga radeon) I always get:

... has failed to start: internal error: PCI end devices can not be 
assigned to guest


1.  I MUST also exclude these devices at startup in EFI.cfg ???
      all devices that share the same interrupt ??


2.  in lspci -t (show bus tree) which means this representation ??
(*+ -01.0- [02-03] ---- 00.0*) ??

sudo lspci -vt
- [0000: 00] - + - 00.0 Intel Corporation 3rd Gen Core processor DRAM 
Controller
           + -01.0- [02-03] ---- 00.0 Advanced Micro Devices, Inc. [AMD / 
ATI] Thames [Radeon HD 7550M / 7570M / 7650M]



3.  is the kernel driver loaded on the card no good? (*Kernel modules: 
radeon) *

4.  In the conclusions of the guide, where can I find more info to try with 
libvirt and libxl ??


"If it doesn’t work and you need to debug more things, you can go deeper.

    Virsh (start, define, ...)
    /etc/libvirt/libxl/
    xl
    /etc/qubes/templates/libvirt/xen/by-name/
    /usr/lib/xen/boot/
    virsh -c xen:/// domxml-to-native xen-xm /etc/libvirt/libxl/..."



*Thanks to those who want to explain these doubts.*


sudo lspci -v -d 1002:6841
02:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] 
Thames [Radeon HD 7550M/7570M/7650M] (prog-if 00 [VGA controller])
    Flags: fast devsel, IRQ 16
    Memory at e0000000 (64-bit, prefetchable) [size=256M]
    Memory at f7e20000 (64-bit, non-prefetchable) [size=128K]
    I/O ports at e000 [size=256]
    Expansion ROM at f7e00000 [disabled] [size=128K]
    Capabilities: [50] Power Management version 3
    Capabilities: [58] Express Legacy Endpoint, MSI 00
    Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
    Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 
<?>
    Capabilities: [150] Advanced Error Reporting
    Kernel driver in use: pciback
    Kernel modules: radeon

____________________________________

sudo lspci -vt
-[0000:00]-+-00.0  Intel Corporation 3rd Gen Core processor DRAM Controller
           +-01.0-[02-03]----00.0  Advanced Micro Devices, Inc. [AMD/ATI] 
Thames [Radeon HD 7550M/7570M/7650M]
           +-02.0  Intel Corporation 3rd Gen Core processor Graphics 
Controller
           +-14.0  Intel Corporation 7 Series/C210 Series Chipset Family 
USB xHCI Host Controller
           +-16.0  Intel Corporation 7 Series/C216 Chipset Family MEI 
Controller #1
           +-1a.0  Intel Corporation 7 Series/C216 Chipset Family USB 
Enhanced Host Controller #2
           +-1b.0  Intel Corporation 7 Series/C216 Chipset Family High 
Definition Audio Controller
           +-1c.0-[04]--
________________________________________________
sudo lspci -vv

00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core 
processor PCI Express Root Port (rev 09) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0, IRQ 16
    Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
    I/O behind bridge: 0000e000-0000efff [size=4K]
    Memory behind bridge: f7e00000-f7efffff [size=1M]
    Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff [
size=256M]
    Capabilities: [88] Subsystem: Dell Device 057e
    Capabilities: [80] Power Management version 3
    Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
    Capabilities: [a0] Express Root Port (Slot+), MSI 00
    Capabilities: [100] Virtual Channel
    Capabilities: [140] Root Complex Link
    Kernel driver in use: pcieport


00:1a.0 USB controller: Intel Corporation 7 Series/C216 Chipset Family USB 
Enhanced Host Controller #2 (rev 04) (prog-if 20 [EHCI])
    Subsystem: Dell Device 057e
    Flags: medium devsel, IRQ 16
    Memory at f7f18000 (32-bit, non-prefetchable) [size=1K]
    Capabilities: [50] Power Management version 2
    Capabilities: [58] Debug port: BAR=1 offset=00a0
    Capabilities: [98] PCI Advanced Features
    Kernel driver in use: pciback
    Kernel modules: ehci_pci

00:1c.0 PCI bridge: Intel Corporation 7 Series/C216 Chipset Family PCI 
Express Root Port 1 (rev c4) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0, IRQ 16
    Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
    I/O behind bridge: None
    Memory behind bridge: None
    Prefetchable memory behind bridge: None
    Capabilities: [40] Express Root Port (Slot+), MSI 00
    Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
    Capabilities: [90] Subsystem: Dell Device 057e
    Capabilities: [a0] Power Management version 2
    Kernel driver in use: pcieport


-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/20c1c014-57d4-4023-8bd3-27d72793a16c%40googlegroups.com.

Reply via email to