January 1, 2020 5:09 PM, "Claudia" <claud...@disroot.org> wrote:
> However, I still have a long road ahead of me. I did several suspend/resume > cycles, and each time I > had a different combination of problems, including the mouse sticking, the > keyboard not working, > and finally input/output errors and segmentation faults in the terminal. But > the Xen problem has > been identified nonetheless. I'll try kernel-latest and see if that changes > anything. Installed kernel-latest from stable, 5.3.11-1.qubes.x86, and no difference as far as I can tell. It resumes fine the first time usually, but after the second or third cycle, I get a bunch of io errors, as though someone unplugged the SATA connector. I think this is actually the underlying cause of the other symptoms. This is with no VMs running. No swap. ata1.00: qc timeout (cmd 0xec) ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4) ata1.00: limiting SATA link speed to 3.0 Gbps ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320) ata1.00: revalidation failed (errno=-5) ata1.00: disabled sd 0:0:0:0: [sda] Start/Stop Unit failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK sd 0:0:0:0: [sda] tag#21 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK sd 0:0:0:0: [sda] tag#21 CDB: Write(10) 2a 00 3c 9f [...] blk_update_request: I/O error, dev sda, sector [...] op 0x1: (WRITE) flags 0x100000 phys_seg 1 prio class 0 BTRFS error (device dm-0): bdev /dev/mapper/luks-[...] errs: wr 1, rd 0, flush 0, corrupt 0, gen0 Note this different than the Fedora 25 resume behavior. In F25 with 4.8.6, the screen doesn't power on, but the system seems responsive otherwise. For example ctrl-alt-delete reboots after 60 seconds as expected. (In Qubes, after resuming a second or third time and getting disk errors, when you try to shutdown it will just hang indefinitely.) But F25 was running from a USB drive so I wouldn't necessarily know if there were SATA errors in that case. I'll see if I can figure out how to apply the patch to the latest 4.1 (F31-based) and try it from there. In the mean time, if anyone has any ideas please share. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/8b5cad4abcdce9da863ab033c86752d7%40disroot.org.
