On 19 feb, 17:52, "Richard B. gilbert" <[EMAIL PROTECTED]> wrote: > Juan C. Gonzalez wrote: > > Here you have more data. > > > # date > > Mon Feb 19 14:04:01 CET 2007 > > > ntpdate emaddns1.endesa.es > > 19 Feb 16:08:09 ntpdate[12750]: step time server 172.29.8.4 offset > > 7431.142532 sec > > > /etc/init.d/xntp start > > Try to get initial date and time via NTP from emaddns1.endesa.es > > emaddns3.endesa.es done > > Starting network time protocol daemon > > (NTPD) > > done > > > date > > Mon Feb 19 16:14:57 CET 2007 (time real 16:20) > > > ntptrace > > localhost: stratum 16, offset 0.000000, synch distance 0.006060 > > > ntpq -p > > remote refid st t when poll reach delay > > offset jitter > > ============================================================= > > emaddns1.endesa 172.31.147.70 2 u 25 64 177 1.036 298656. > > 195271. > > emaddns3.endesa .INIT. 16 u - 64 0 0.000 > > 0.000 0.000 > > > ntpq> rv > > assID=0 status=c011 sync_alarm, sync_unspec, 1 event, event_restart, > > version="ntpd [EMAIL PROTECTED] Wed Feb 14 08:29:41 UTC 2007 (1)", > > processor="i686", system="Linux/2.6.5-7.244-smp", leap=11, stratum=16, > > precision=-19, rootdelay=0.000, rootdispersion=6.420, peer=0, > > refid=INIT, reftime=00000000.00000000 Thu, Feb 7 2036 7:28:16.000, > > poll=6, clock=c9843da1.45e404a4 Mon, Feb 19 2007 16:15:45.273, > > state=1, > > offset=0.000, frequency=0.000, jitter=0.002, noise=0.002, > > stability=0.000 > > <snip> > > Your time is not close enough to being correct that NTP can correct it. > I'm drawing a blank at the moment on whether that figure of 298656. is > milliseconds or seconds. In either case it is HUGE!!!! > > SET YOUR CLOCK TO THE CORRECT TIME BEFORE STARTING NTPD!!!!!!!!!!!!!!! > !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! > Alternatively you can use the -g option to set the clock at startup but > GET THAT CLOCK SET!!!!- Ocultar texto de la cita - > > - Mostrar texto de la cita -
When I run ntpd the clock it puts in hour correctly. My question is: why then does not it continue supporting the hour? _______________________________________________ questions mailing list [email protected] https://lists.ntp.isc.org/mailman/listinfo/questions
