On Nov 25, 5:46 pm, Steve Kostecke <[EMAIL PROTECTED]> wrote:
> On 2008-11-24, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
>
> > /etc/ntp.audio0
>
> > idev /dev/dsp
> > cdev /dev/mixer
> > source line
> > agc line
> > monitor line
>
> Have you tried 'source mic' ?
>
> --
> Steve Kostecke <[EMAIL PROTECTED]>
> NTP Public Services Project -http://support.ntp.org/
I changed everything to take the mic input.
My mixer settings:
time:~# aumix -q
vol 72, 72, P
pcm 92, 92
speaker 0, 0
line 84, 84, P
mic 80, 80, R
cd 0, 0, P
igain 75, 75
line1 4, 4, P
phin 0, 0, P
phout 75, 75, P
video 0, 0, P
monitor 0, 0
The flag2 switch in ntp.conf:
server 127.127.7.0
fudge 127.127.7.0 flag2 0 flag4 1 time1 0.0005366 stratum 1
My ntp.audio0 file:
idev /dev/oss/ich0/pcm0
cdev /dev/oss/ich0/mix0
source mic
agc mic
monitor mic
It's still not working, even though I can hear it loud and clear
through the headphones plugged into the line out on the computer/
time:~# ntpq -c cl
assID=0 status=0000 clk_okay, last_clk_okay,
device="CHU Audio/Modem Receiver", timecode=, poll=0, noreply=0,
badformat=0, baddata=0, fudgetime1=0.537, stratum=1, refid=, flags=8
time:~# ntpdc -c kerninfo
pll offset: 0 s
pll frequency: 0.000 ppm
maximum error: 0.101016 s
estimated error: 1.6e-05 s
status: 0040 unsync
pll time constant: 4
precision: 1e-06 s
frequency tolerance: 500 ppm
time:~# ntpdc -c loopinfo
offset: 0.000000 s
frequency: 0.000 ppm
poll adjust: 0
watchdog timer: 498 s
time:~# ntpq -p
remote refid st t when poll reach delay
offset jitter
===================================================
CHU_AUDIO(0) 0.0.0.0 1 l - 64 0 0.000
0.000 0.001
I think I'm going to try a different OS (maybe Solaris) and computer.
Court.
_______________________________________________
questions mailing list
[email protected]
https://lists.ntp.org/mailman/listinfo/questions
