Oh crap.. That was me. lol
Now I see my mistake. Time to break out the soldering iron for a fix. On Feb 21, 10:35 am, "David J Taylor" <david- [email protected]> wrote: > "Alby VA" <[email protected]> wrote in message > > news:05874738-7984-4ff4-98d0-be8c6ad36...@eb6g2000vbb.googlegroups.com... > [] > > > With your Sure GPS showing "PPS Clock Discipline", what does your > > ntp.conf file look like? I ask, because if I list == server > > 127.127.22.0 == > > I don't get anything (even though I did the soldering per > >http://www.satsignal.eu/ntp/Sure-GPS.htm > > If you are the person who recently posted a photo of the board > modifications you made, it appeared that the lead which is supposed to go > through the board, through the hole for the connector marked "J2", was in > fact soldered to that through-plated hole, which would short it to ground, > and give no DCD and hence no PPS output. > > If you aren't that person, or if the soldering has been redone, things > should be OK. You can check for the DCD line being correctly wired by > looking for flashes with my Serial port LEDs program (you will need to > stop NTP to run this). > > http://www.satsignal.eu/software/net.htm#SerialPortLEDs > > Look for a brief flash on the DCD LED every second. > > Cheers, > David _______________________________________________ questions mailing list [email protected] http://lists.ntp.org/listinfo/questions
