On 29/10/2012 15:09, John Hasler wrote:
David Taylor writes:
if I try and compile with the flags for automatic start-up the make
fails due a missing file: sys/capability.h. Happens with both 4.2.6p5
and 4.2.7p314.
Install the linux-headers package appropriate to your kernel.
Thanks, John. Fixed with:
$ sudo apt-get install libcap-dev
I do find it confusing that some headers are there, but not others.
Perhaps part of making the Raspberry Pi a minimal system? At least NTP
is now coming up after a reboot, and with PPS!
I took your advice about altering the init.d script, but it's obviously
a little more complicated than that as when you try and stop NTP it
can't find the process. For the moment I'm not worrying about that. It
still leaves the issue of why it doesn't connect to gpsd or, if it is
connecting, why it sees no valid timestamps. While I run cgps NTP sees
data from gpsd, but not otherwise.
Thanks to everyone for their help.
--
Cheers,
David
Web: http://www.satsignal.eu
_______________________________________________
questions mailing list
[email protected]
http://lists.ntp.org/listinfo/questions
