On 16/11/2013 11:58, Rob wrote:
[]
Merely upgrading the kernel from 3.2.27 to 3.6.11 will not cause such
a change.  However, it is always risky to do so because there may be
dependencies between the kernel and other parts of the system, like
libraries.

So what people usually do is use "apt-get upgrade" to perform such an
update, and of course it may change a lot of other things.

Installation locations are normally determined by "configure" scripts
that are part of downloaded packages, and use very complicated mechanisms
to determine the best installation location for programs.  They can
also be directed using options to the "configure" script.  Finally
a Makefile is written that normally is quite static.  I would not
expect a "make install" to install to a different location when the
system is changed and "./configure" has not been run again, but
who knows...

No, I'm going to do the complete upgrade using apt-get, and see what happens. The difference was between a freshly installed 3.2.27 and freshly installed 3.6.11+ systems (on two different Raspberry Pi cards).

Having just done the upgrade (almost any settings), I will add my own kernel and modules which have PPS support, and the changes suggested in NTP bug 2314 (which was actually an OS configuration issue). It looks to mostly be working as expected, perhaps will the omission of my snmp extension for CPU temperature monitoring.

Unfortunately I do need to use ./configure --enable-linuxcaps with NTP to enable the PPS support in NTP (if I recall correctly), so may be that will mess things up, and my next compile will have the executables sprayed over the various directories. At least now I know it may happen, I can be on the lookout for it!

My notes are here:
  http://www.satsignal.eu/ntp/Raspberry-Pi-NTP.html
  http://www.satsignal.eu/raspberry-pi/kernel-recompile.html

and are very much a living work!

Thanks for your help.
--
Cheers,
David
Web: http://www.satsignal.eu

_______________________________________________
questions mailing list
[email protected]
http://lists.ntp.org/listinfo/questions

Reply via email to