Yes, you should create a separate as i propose before … you can use qutecom-2.2/build/ .. there are helper script
You can use hg purge to remove all previous created files Laurent Le 19 mars 2011 à 01:04, Veljko Milisavljević a écrit : > A separate build folder is required. But if I make it and run cmake from it > it also complains. > > c:\qutecom\qutecom-2.2>cmake -DCMAKE_BUILD_TYPE=Debug -G "NMake Makefiles" > CMake Error at owbuild/owbuild/OWEnsureOutOfSourceBuild.cmake:18 (message): > A separate build directory is required, please create one and run cmake > from this directory > Call Stack (most recent call first): > CMakeLists-owbuild.txt:16 (ow_ensure_out_of_source_build) > CMakeLists.txt:1 (include) > > > -- Configuring done > > 2011/3/19 Laurent Tarrisse <laur...@mbdsys.com> > maybe remove your CMakeCache.txt > > Laurent > > Le 19 mars 2011 à 00:46, Veljko Milisavljević a écrit : > >> Hm, funny , now I have the same error,although rc and cl are in path: >> >> c:\qutecom\qutecom-2.2>cmake -DCMAKE_BUILD_TYPE=Debug -G "NMake Makefiles" >> -- The C compiler identification is MSVC >> -- The CXX compiler identification is MSVC >> CMake Error: your RC compiler: "CMAKE_RC_COMPILER-NOTFOUND" was not found. >> Please set CMAKE_RC_COMPILER to a valid compiler pa >> th or name. >> -- Using FREE VC TOOLS, NO DEBUG available >> -- Check for working C compiler: C:/Program Files/Microsoft Visual Studio >> 8/VC/bin/cl.exe >> CMake Error: your RC compiler: "CMAKE_RC_COMPILER-NOTFOUND" was not found. >> Please set CMAKE_RC_COMPILER to a valid compiler pa >> th or name. >> CMake Error: Internal CMake error, TryCompile configure of cmake failed >> -- Check for working C compiler: C:/Program Files/Microsoft Visual Studio >> 8/VC/bin/cl.exe -- broken >> CMake Error at C:/Program Files/CMake >> 2.6/share/cmake-2.6/Modules/CMakeTestCCompiler.cmake:32 (MESSAGE): >> The C compiler "C:/Program Files/Microsoft Visual Studio 8/VC/bin/cl.exe" >> is not able to compile a simple test program. >> >> It fails with the following output: >> >> >> >> >> >> CMake will not be able to correctly generate this project. >> Call Stack (most recent call first): >> CMakeLists-owbuild.txt:3 (project) >> CMakeLists.txt:1 (include) >> >> >> -- Configuring done >> >> c:\qutecom\qutecom-2.2>cl >> Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.42 for >> 80x86 >> Copyright (C) Microsoft Corporation. All rights reserved. >> >> usage: cl [ option... ] filename... [ /link linkoption... ] >> >> c:\qutecom\qutecom-2.2>rc >> fatal error RC1107: invalid usage; use RC /? for Help >> >> 2011/3/19 Laurent Tarrisse <laur...@mbdsys.com> >> Yes, it is the issue >> >> hg clone http://hg.qutecom.org/qutecom-2.2 >> >> Laurent >> >> Le 19 mars 2011 à 00:17, Veljko Milisavljević a écrit : >> >>> I have it already. >>> I am trying to build the stable release taken from: >>> http://www.qutecom.org/downloads/QuteCom-2.2.tar.gz >>> It doesn't have a .hg folder inside. Maybe that is the issue. >>> >>> >>> 2011/3/19 Laurent Tarrisse <laur...@mbdsys.com> >>> install or/and mercurial to your path >>> >>> Laurent >>> >>> Le 19 mars 2011 à 00:09, Veljko Milisavljević a écrit : >>> >>>> This time it was better: >>>> >>>> >>>> c:\qutecom\debug>build >>>> >>>> c:\qutecom\debug>cmake -DCMAKE_BUILD_TYPE=Debug -G "NMake Makefiles" >>>> -- The C compiler identification is MSVC >>>> -- The CXX compiler identification is MSVC >>>> -- Check for CL compiler version >>>> -- Check for CL compiler version - 1400 >>>> -- Check if this is a free VC compiler >>>> -- Check if this is a free VC compiler - no >>>> -- Check CL platform >>>> -- Check CL platform - 32 bit >>>> -- Check for working C compiler: C:/Program Files/Microsoft Visual Studio >>>> 8/VC/bin/cl.exe >>>> -- Check for working C compiler: C:/Program Files/Microsoft Visual Studio >>>> 8/VC/bin/cl.exe -- works >>>> -- Detecting C compiler ABI info >>>> -- Detecting C compiler ABI info - done >>>> -- Check for working CXX compiler: C:/Program Files/Microsoft Visual >>>> Studio 8/VC/bin/cl.exe >>>> -- Check for working CXX compiler: C:/Program Files/Microsoft Visual >>>> Studio 8/VC/bin/cl.exe -- works >>>> -- Detecting CXX compiler ABI info >>>> -- Detecting CXX compiler ABI info - done >>>> -- Found Mercurial (hg): C:/Program Files/TortoiseHg/hg.exe >>>> abort: there is no Mercurial repository here (.hg not found) >>>> CMake Error at owbuild/owbuild/OWEnsureOutOfSourceBuild.cmake:18 (message): >>>> A separate build directory is required, please create one and run cmake >>>> from this directory >>>> Call Stack (most recent call first): >>>> CMakeLists-owbuild.txt:16 (ow_ensure_out_of_source_build) >>>> CMakeLists.txt:1 (include) >>>> >>>> >>>> -- Configuring done >>>> >>>> 2011/3/18 Laurent Tarrisse <laur...@mbdsys.com> >>>> Try this : >>>> >>>> Create a folder qutecom-2.2/debug/ >>>> cd qutecom-2.2/debug/ >>>> >>>> cmake .. -G "NMake Makefiles" >>>> >>>> (do not add other define) >>>> >>>> Laurent >>>> >>>> Le 18 mars 2011 à 23:54, Veljko Milisavljević a écrit : >>>> >>>>> Right , >>>>> it wasn't in the path. This time I added it and add also a >>>>> -DCMAKE_RC_COMPILER >>>>> and here's the error. It seems that it doesn't understand path with >>>>> spaces correctly. It has merged current path with the part of the path to >>>>> cl.exe >>>>> >>>>> C:\Users\veljko\Documents\Projects\QuteCom\QuteCom-2.2\qutecom-2-2>cmake >>>>> -DCMAKE_BUILD_TYPE=Debug -DCMAKE_RC_COMPILER=C:/Program >>>>> Files/Microsoft Visual Studio 8/VC/bin/rc.exe -G "NMake Makefiles" >>>>> Make Error: The source directory >>>>> "C:/Users/veljko/Documents/Projects/QuteCom/QuteCom-2.2/qutecom-2-2/8/VC/bin/rc.exe" >>>>> does not >>>>> xist. >>>>> pecify --help for usage, or press the help button on the CMake GUI. >>>>> >>>>> :\Users\veljko\Documents\Projects\QuteCom\QuteCom-2.2\qutecom-2-2> >>>>> >>>>> >>>>> >>>>> 2011/3/18 Laurent Tarrisse <laur...@mbdsys.com> >>>>> I think your "setting" script miss something : it seems that C:/Program >>>>> Files/Microsoft Visual Studio 8/VC/bin/ is not in your PATH … >>>>> >>>>> What is the result of : rc.exe /? >>>>> >>>>> Laurent >>>>> >>>>> Le 18 mars 2011 à 23:20, Veljko Milisavljević a écrit : >>>>> >>>>>> Here's the screenshot, >>>>>> a little bit more readable >>>>>> >>>>>> >>>>>> 2011/3/18 Veljko Milisavljević <mveljk...@gmail.com> >>>>>> Thank you everyone, >>>>>> I will install VS 2005 and try again. >>>>>> >>>>>> >>>>>> Veljko >>>>>> >>>>>> 2011/3/18 Laurent Tarrisse <laur...@mbdsys.com> >>>>>> You should use visual 2005 and use Start/All Programs/Microsof Visual >>>>>> Studio 2005/Visual Studio Tools/Visual Studio 2005 Command Prompt >>>>>> >>>>>> Laurent >>>>>> >>>>>> Le 18 mars 11 à 14:19, Veljko Milisavljević a écrit : >>>>>> >>>>>>> I'm typing from command line.Is that ok? >>>>>>> Right, I should install 2005 >>>>>>> because on the web site says: >>>>>>> >>>>>>> The most mature compiler supported is Visual C++ 2003 (version 7.1). >>>>>>> >>>>>>> Visual C++ 2005 (version 8.0) is supported as well. >>>>>>> >>>>>>> Visual Studio 2008 hasn't been tested yet. >>>>>>> >>>>>>> >>>>>>> >>>>>>> 2011/3/18 Laurent Tarrisse <laur...@mbdsys.com> >>>>>>> Sorry i mean Visual 2005 command prompt >>>>>>> >>>>>>> Laurent >>>>>>> >>>>>>> Le 18 mars 11 à 14:15, Laurent Tarrisse a écrit : >>>>>>> >>>>>>>> Hello, >>>>>>>> >>>>>>>> Maybe you are not using Visual 2008 command prompt ? >>>>>>>> >>>>>>>> Laurent >>>>>>>> >>>>>>>> >>>>>>>> Le 18 mars 11 à 14:05, Veljko Milisavljević a écrit : >>>>>>>> >>>>>>>>> Here's what I done so far: >>>>>>>>> installed nsis,python,dxsdk,winsdk and cmake >>>>>>>>> created a QTDIR environment variable and pointed it to unpacked >>>>>>>>> qt-4.5.3 >>>>>>>>> didn't do anything with boost >>>>>>>>> Then went to QuteCom build folder >>>>>>>>> and typed: >>>>>>>>> cmake -DCMAKE_BUILD_TYPE=Debug -G "NMake Makefiles" >>>>>>>>> >>>>>>>>> error is: >>>>>>>>> >>>>>>>>> >>>>>>>>> :\QuteCom-2.2\qutecom-2-2-fd680f034aa8>cmake -DCMAKE_BUILD_TYPE=Debug >>>>>>>>> -G "NMake >>>>>>>>> - The C compiler identification is MSVC >>>>>>>>> - The CXX compiler identification is MSVC >>>>>>>>> - Using FREE VC TOOLS, NO DEBUG available >>>>>>>>> - Check for working C compiler: C:/Program Files/Microsoft Visual >>>>>>>>> Studio 8/VC/b >>>>>>>>> - Check for working C compiler: C:/Program Files/Microsoft Visual >>>>>>>>> Studio 8/VC/b >>>>>>>>> Make Error at C:/Program Files/CMake >>>>>>>>> 2.6/share/cmake-2.6/Modules/CMakeTestCComp >>>>>>>>> The C compiler "C:/Program Files/Microsoft Visual Studio >>>>>>>>> 8/VC/bin/cl.exe" >>>>>>>>> is not able to compile a simple test program. >>>>>>>>> >>>>>>>>> It fails with the following output: >>>>>>>>> >>>>>>>>> Change Dir: >>>>>>>>> C:/QuteCom-2.2/qutecom-2-2-fd680f034aa8/CMakeFiles/CMakeTmp >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> Run Build Command:nmake /NOLOGO "cmTryCompileExec\fast" >>>>>>>>> >>>>>>>>> C:\Windows\system32\nmake.exe -f >>>>>>>>> CMakeFiles\cmTryCompileExec.dir\build.make /nologo -L >>>>>>>>> CMakeFiles\cmTryCompileExec.dir\build >>>>>>>>> >>>>>>>>> "C:\Program Files\CMake 2.6\bin\cmake.exe" -E >>>>>>>>> cmake_progress_report >>>>>>>>> >>>>>>>>> C:\QuteCom-2.2\qutecom-2-2-fd680f034aa8\CMakeFiles\CMakeTmp\CMakeFiles >>>>>>>>> 1 >>>>>>>>> >>>>>>>>> Building C object CMakeFiles/cmTryCompileExec.dir/testCCompiler.c.obj >>>>>>>>> >>>>>>>>> C:\PROGRA~1\MICROS~2\VC\bin\cl.exe >>>>>>>>> @C:\Users\mrdbgd\AppData\Local\Temp\nmF3C4.tmp >>>>>>>>> >>>>>>>>> testCCompiler.c >>>>>>>>> >>>>>>>>> Linking C executable cmTryCompileExec.exe >>>>>>>>> >>>>>>>>> C:\PROGRA~1\MICROS~2\VC\bin\cl.exe /nologo >>>>>>>>> @CMakeFiles\cmTryCompileExec.dir\objects.rsp >>>>>>>>> @C:\Users\mrdbgd\AppData\Local\Temp\nmF3F4.tmp >>>>>>>>> >>>>>>>>> LINK : fatal error LNK1181: cannot open input file 'kernel32.lib' >>>>>>>>> >>>>>>>>> NMAKE : fatal error U1077: 'C:\PROGRA~1\MICROS~2\VC\bin\cl.exe' : >>>>>>>>> return >>>>>>>>> code '0x2' >>>>>>>>> >>>>>>>>> Stop. >>>>>>>>> >>>>>>>>> NMAKE : fatal error U1077: 'C:\Windows\system32\nmake.exe' : return >>>>>>>>> code >>>>>>>>> '0x2' >>>>>>>>> >>>>>>>>> Stop. >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> CMake will not be able to correctly generate this project. >>>>>>>>> all Stack (most recent call first): >>>>>>>>> CMakeLists-owbuild.txt:3 (project) >>>>>>>>> CMakeLists.txt:1 (include) >>>>>>>>> >>>>>>>>> >>>>>>>>> - Configuring done >>>>>>>>> >>>>>>>>> >>>>>>>>> 2011/3/18 Chris Maciejewski <ch...@wima.co.uk> >>>>>>>>> Hi, >>>>>>>>> >>>>>>>>> Can you please post error message you are getting when tying to build? >>>>>>>>> >>>>>>>>> Regards, >>>>>>>>> Chris >>>>>>>>> >>>>>>>>> 2011/3/18 Veljko Milisavljević <mveljk...@gmail.com>: >>>>>>>>> > Hi all, >>>>>>>>> > does someone have a document on how to build >>>>>>>>> > from sources? >>>>>>>>> > I have downloaded : >>>>>>>>> > QuteCom-2.2.tar.gz >>>>>>>>> > winSDK.zip >>>>>>>>> > qt-4.5.3 >>>>>>>>> > pywin32-211.win32-py2.5 >>>>>>>>> > python-2.5.2 >>>>>>>>> > nsis-2.44 >>>>>>>>> > dxSDK >>>>>>>>> > cmake-2.6.0 >>>>>>>>> > boost.1.38 >>>>>>>>> > I am on Windows 7 >>>>>>>>> > thanks >>>>>>>>> > Veljko >>>>>>>>> _______________________________________________ >>>>>>>>> QuteCom-dev mailing list >>>>>>>>> QuteCom-dev@lists.qutecom.org >>>>>>>>> http://lists.qutecom.org/mailman/listinfo/qutecom-dev >>>>>>>>> >>>>>>>>> _______________________________________________ >>>>>>>>> QuteCom-dev mailing list >>>>>>>>> QuteCom-dev@lists.qutecom.org >>>>>>>>> http://lists.qutecom.org/mailman/listinfo/qutecom-dev >>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> QuteCom-dev mailing list >>>>>>>> QuteCom-dev@lists.qutecom.org >>>>>>>> http://lists.qutecom.org/mailman/listinfo/qutecom-dev >>>>>>> >>>>>>> >>>>>>> _______________________________________________ >>>>>>> QuteCom-dev mailing list >>>>>>> QuteCom-dev@lists.qutecom.org >>>>>>> http://lists.qutecom.org/mailman/listinfo/qutecom-dev >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> QuteCom-dev mailing list >>>>>> QuteCom-dev@lists.qutecom.org >>>>>> http://lists.qutecom.org/mailman/listinfo/qutecom-dev >>>>>> >>>>>> >>>>>> >>>>>> <qutecom.JPG> >>>>> >>>>> >>>>> _______________________________________________ >>>>> QuteCom-dev mailing list >>>>> QuteCom-dev@lists.qutecom.org >>>>> http://lists.qutecom.org/mailman/listinfo/qutecom-dev >>>>> >>>>> >>>> >>>> >>>> _______________________________________________ >>>> QuteCom-dev mailing list >>>> QuteCom-dev@lists.qutecom.org >>>> http://lists.qutecom.org/mailman/listinfo/qutecom-dev >>>> >>>> >>> >>> >>> _______________________________________________ >>> QuteCom-dev mailing list >>> QuteCom-dev@lists.qutecom.org >>> http://lists.qutecom.org/mailman/listinfo/qutecom-dev >>> >>> >> >> >> _______________________________________________ >> QuteCom-dev mailing list >> QuteCom-dev@lists.qutecom.org >> http://lists.qutecom.org/mailman/listinfo/qutecom-dev >> >> > > > _______________________________________________ > QuteCom-dev mailing list > QuteCom-dev@lists.qutecom.org > http://lists.qutecom.org/mailman/listinfo/qutecom-dev > >
_______________________________________________ QuteCom-dev mailing list QuteCom-dev@lists.qutecom.org http://lists.qutecom.org/mailman/listinfo/qutecom-dev
