Maybe you have removed qutecom-2.2/owbuild (you can use hg revert --all to recover all deleted tracked files)
Laurent Le 19 mars 2011 à 01:46, Veljko Milisavljević a écrit : > I have now this error: > Unknown CMake command "ow_create_static_library". > > > > 2011/3/19 Laurent Tarrisse <laur...@mbdsys.com> > Yes, you should create a separate as i propose before … you can use > qutecom-2.2/build/ .. there are helper script > > You can use hg purge to remove all previous created files > > Laurent > > > Le 19 mars 2011 à 01:04, Veljko Milisavljević a écrit : > >> A separate build folder is required. But if I make it and run cmake from it >> it also complains. >> >> c:\qutecom\qutecom-2.2>cmake -DCMAKE_BUILD_TYPE=Debug -G "NMake Makefiles" >> CMake Error at owbuild/owbuild/OWEnsureOutOfSourceBuild.cmake:18 (message): >> A separate build directory is required, please create one and run cmake >> from this directory >> Call Stack (most recent call first): >> CMakeLists-owbuild.txt:16 (ow_ensure_out_of_source_build) >> CMakeLists.txt:1 (include) >> >> >> -- Configuring done >> >> 2011/3/19 Laurent Tarrisse <laur...@mbdsys.com> >> maybe remove your CMakeCache.txt >> >> Laurent >> >> Le 19 mars 2011 à 00:46, Veljko Milisavljević a écrit : >> >>> Hm, funny , now I have the same error,although rc and cl are in path: >>> >>> c:\qutecom\qutecom-2.2>cmake -DCMAKE_BUILD_TYPE=Debug -G "NMake Makefiles" >>> -- The C compiler identification is MSVC >>> -- The CXX compiler identification is MSVC >>> CMake Error: your RC compiler: "CMAKE_RC_COMPILER-NOTFOUND" was not found. >>> Please set CMAKE_RC_COMPILER to a valid compiler pa >>> th or name. >>> -- Using FREE VC TOOLS, NO DEBUG available >>> -- Check for working C compiler: C:/Program Files/Microsoft Visual Studio >>> 8/VC/bin/cl.exe >>> CMake Error: your RC compiler: "CMAKE_RC_COMPILER-NOTFOUND" was not found. >>> Please set CMAKE_RC_COMPILER to a valid compiler pa >>> th or name. >>> CMake Error: Internal CMake error, TryCompile configure of cmake failed >>> -- Check for working C compiler: C:/Program Files/Microsoft Visual Studio >>> 8/VC/bin/cl.exe -- broken >>> CMake Error at C:/Program Files/CMake >>> 2.6/share/cmake-2.6/Modules/CMakeTestCCompiler.cmake:32 (MESSAGE): >>> The C compiler "C:/Program Files/Microsoft Visual Studio 8/VC/bin/cl.exe" >>> is not able to compile a simple test program. >>> >>> It fails with the following output: >>> >>> >>> >>> >>> >>> CMake will not be able to correctly generate this project. >>> Call Stack (most recent call first): >>> CMakeLists-owbuild.txt:3 (project) >>> CMakeLists.txt:1 (include) >>> >>> >>> -- Configuring done >>> >>> c:\qutecom\qutecom-2.2>cl >>> Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.42 for >>> 80x86 >>> Copyright (C) Microsoft Corporation. All rights reserved. >>> >>> usage: cl [ option... ] filename... [ /link linkoption... ] >>> >>> c:\qutecom\qutecom-2.2>rc >>> fatal error RC1107: invalid usage; use RC /? for Help >>> >>> 2011/3/19 Laurent Tarrisse <laur...@mbdsys.com> >>> Yes, it is the issue >>> >>> hg clone http://hg.qutecom.org/qutecom-2.2 >>> >>> Laurent >>> >>> Le 19 mars 2011 à 00:17, Veljko Milisavljević a écrit : >>> >>>> I have it already. >>>> I am trying to build the stable release taken from: >>>> http://www.qutecom.org/downloads/QuteCom-2.2.tar.gz >>>> It doesn't have a .hg folder inside. Maybe that is the issue. >>>> >>>> >>>> 2011/3/19 Laurent Tarrisse <laur...@mbdsys.com> >>>> install or/and mercurial to your path >>>> >>>> Laurent >>>> >>>> Le 19 mars 2011 à 00:09, Veljko Milisavljević a écrit : >>>> >>>>> This time it was better: >>>>> >>>>> >>>>> c:\qutecom\debug>build >>>>> >>>>> c:\qutecom\debug>cmake -DCMAKE_BUILD_TYPE=Debug -G "NMake Makefiles" >>>>> -- The C compiler identification is MSVC >>>>> -- The CXX compiler identification is MSVC >>>>> -- Check for CL compiler version >>>>> -- Check for CL compiler version - 1400 >>>>> -- Check if this is a free VC compiler >>>>> -- Check if this is a free VC compiler - no >>>>> -- Check CL platform >>>>> -- Check CL platform - 32 bit >>>>> -- Check for working C compiler: C:/Program Files/Microsoft Visual Studio >>>>> 8/VC/bin/cl.exe >>>>> -- Check for working C compiler: C:/Program Files/Microsoft Visual Studio >>>>> 8/VC/bin/cl.exe -- works >>>>> -- Detecting C compiler ABI info >>>>> -- Detecting C compiler ABI info - done >>>>> -- Check for working CXX compiler: C:/Program Files/Microsoft Visual >>>>> Studio 8/VC/bin/cl.exe >>>>> -- Check for working CXX compiler: C:/Program Files/Microsoft Visual >>>>> Studio 8/VC/bin/cl.exe -- works >>>>> -- Detecting CXX compiler ABI info >>>>> -- Detecting CXX compiler ABI info - done >>>>> -- Found Mercurial (hg): C:/Program Files/TortoiseHg/hg.exe >>>>> abort: there is no Mercurial repository here (.hg not found) >>>>> CMake Error at owbuild/owbuild/OWEnsureOutOfSourceBuild.cmake:18 >>>>> (message): >>>>> A separate build directory is required, please create one and run cmake >>>>> from this directory >>>>> Call Stack (most recent call first): >>>>> CMakeLists-owbuild.txt:16 (ow_ensure_out_of_source_build) >>>>> CMakeLists.txt:1 (include) >>>>> >>>>> >>>>> -- Configuring done >>>>> >>>>> 2011/3/18 Laurent Tarrisse <laur...@mbdsys.com> >>>>> Try this : >>>>> >>>>> Create a folder qutecom-2.2/debug/ >>>>> cd qutecom-2.2/debug/ >>>>> >>>>> cmake .. -G "NMake Makefiles" >>>>> >>>>> (do not add other define) >>>>> >>>>> Laurent >>>>> >>>>> Le 18 mars 2011 à 23:54, Veljko Milisavljević a écrit : >>>>> >>>>>> Right , >>>>>> it wasn't in the path. This time I added it and add also a >>>>>> -DCMAKE_RC_COMPILER >>>>>> and here's the error. It seems that it doesn't understand path with >>>>>> spaces correctly. It has merged current path with the part of the path >>>>>> to cl.exe >>>>>> >>>>>> C:\Users\veljko\Documents\Projects\QuteCom\QuteCom-2.2\qutecom-2-2>cmake >>>>>> -DCMAKE_BUILD_TYPE=Debug -DCMAKE_RC_COMPILER=C:/Program >>>>>> Files/Microsoft Visual Studio 8/VC/bin/rc.exe -G "NMake Makefiles" >>>>>> Make Error: The source directory >>>>>> "C:/Users/veljko/Documents/Projects/QuteCom/QuteCom-2.2/qutecom-2-2/8/VC/bin/rc.exe" >>>>>> does not >>>>>> xist. >>>>>> pecify --help for usage, or press the help button on the CMake GUI. >>>>>> >>>>>> :\Users\veljko\Documents\Projects\QuteCom\QuteCom-2.2\qutecom-2-2> >>>>>> >>>>>> >>>>>> >>>>>> 2011/3/18 Laurent Tarrisse <laur...@mbdsys.com> >>>>>> I think your "setting" script miss something : it seems that C:/Program >>>>>> Files/Microsoft Visual Studio 8/VC/bin/ is not in your PATH … >>>>>> >>>>>> What is the result of : rc.exe /? >>>>>> >>>>>> Laurent >>>>>> >>>>>> Le 18 mars 2011 à 23:20, Veljko Milisavljević a écrit : >>>>>> >>>>>>> Here's the screenshot, >>>>>>> a little bit more readable >>>>>>> >>>>>>> >>>>>>> 2011/3/18 Veljko Milisavljević <mveljk...@gmail.com> >>>>>>> Thank you everyone, >>>>>>> I will install VS 2005 and try again. >>>>>>> >>>>>>> >>>>>>> Veljko >>>>>>> >>>>>>> 2011/3/18 Laurent Tarrisse <laur...@mbdsys.com> >>>>>>> You should use visual 2005 and use Start/All Programs/Microsof Visual >>>>>>> Studio 2005/Visual Studio Tools/Visual Studio 2005 Command Prompt >>>>>>> >>>>>>> Laurent >>>>>>> >>>>>>> Le 18 mars 11 à 14:19, Veljko Milisavljević a écrit : >>>>>>> >>>>>>>> I'm typing from command line.Is that ok? >>>>>>>> Right, I should install 2005 >>>>>>>> because on the web site says: >>>>>>>> >>>>>>>> The most mature compiler supported is Visual C++ 2003 (version 7.1). >>>>>>>> >>>>>>>> Visual C++ 2005 (version 8.0) is supported as well. >>>>>>>> >>>>>>>> Visual Studio 2008 hasn't been tested yet. >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> 2011/3/18 Laurent Tarrisse <laur...@mbdsys.com> >>>>>>>> Sorry i mean Visual 2005 command prompt >>>>>>>> >>>>>>>> Laurent >>>>>>>> >>>>>>>> Le 18 mars 11 à 14:15, Laurent Tarrisse a écrit : >>>>>>>> >>>>>>>>> Hello, >>>>>>>>> >>>>>>>>> Maybe you are not using Visual 2008 command prompt ? >>>>>>>>> >>>>>>>>> Laurent >>>>>>>>> >>>>>>>>> >>>>>>>>> Le 18 mars 11 à 14:05, Veljko Milisavljević a écrit : >>>>>>>>> >>>>>>>>>> Here's what I done so far: >>>>>>>>>> installed nsis,python,dxsdk,winsdk and cmake >>>>>>>>>> created a QTDIR environment variable and pointed it to unpacked >>>>>>>>>> qt-4.5.3 >>>>>>>>>> didn't do anything with boost >>>>>>>>>> Then went to QuteCom build folder >>>>>>>>>> and typed: >>>>>>>>>> cmake -DCMAKE_BUILD_TYPE=Debug -G "NMake Makefiles" >>>>>>>>>> >>>>>>>>>> error is: >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> :\QuteCom-2.2\qutecom-2-2-fd680f034aa8>cmake >>>>>>>>>> -DCMAKE_BUILD_TYPE=Debug -G "NMake >>>>>>>>>> - The C compiler identification is MSVC >>>>>>>>>> - The CXX compiler identification is MSVC >>>>>>>>>> - Using FREE VC TOOLS, NO DEBUG available >>>>>>>>>> - Check for working C compiler: C:/Program Files/Microsoft Visual >>>>>>>>>> Studio 8/VC/b >>>>>>>>>> - Check for working C compiler: C:/Program Files/Microsoft Visual >>>>>>>>>> Studio 8/VC/b >>>>>>>>>> Make Error at C:/Program Files/CMake >>>>>>>>>> 2.6/share/cmake-2.6/Modules/CMakeTestCComp >>>>>>>>>> The C compiler "C:/Program Files/Microsoft Visual Studio >>>>>>>>>> 8/VC/bin/cl.exe" >>>>>>>>>> is not able to compile a simple test program. >>>>>>>>>> >>>>>>>>>> It fails with the following output: >>>>>>>>>> >>>>>>>>>> Change Dir: >>>>>>>>>> C:/QuteCom-2.2/qutecom-2-2-fd680f034aa8/CMakeFiles/CMakeTmp >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Run Build Command:nmake /NOLOGO "cmTryCompileExec\fast" >>>>>>>>>> >>>>>>>>>> C:\Windows\system32\nmake.exe -f >>>>>>>>>> CMakeFiles\cmTryCompileExec.dir\build.make /nologo -L >>>>>>>>>> CMakeFiles\cmTryCompileExec.dir\build >>>>>>>>>> >>>>>>>>>> "C:\Program Files\CMake 2.6\bin\cmake.exe" -E >>>>>>>>>> cmake_progress_report >>>>>>>>>> >>>>>>>>>> C:\QuteCom-2.2\qutecom-2-2-fd680f034aa8\CMakeFiles\CMakeTmp\CMakeFiles >>>>>>>>>> 1 >>>>>>>>>> >>>>>>>>>> Building C object >>>>>>>>>> CMakeFiles/cmTryCompileExec.dir/testCCompiler.c.obj >>>>>>>>>> >>>>>>>>>> C:\PROGRA~1\MICROS~2\VC\bin\cl.exe >>>>>>>>>> @C:\Users\mrdbgd\AppData\Local\Temp\nmF3C4.tmp >>>>>>>>>> >>>>>>>>>> testCCompiler.c >>>>>>>>>> >>>>>>>>>> Linking C executable cmTryCompileExec.exe >>>>>>>>>> >>>>>>>>>> C:\PROGRA~1\MICROS~2\VC\bin\cl.exe /nologo >>>>>>>>>> @CMakeFiles\cmTryCompileExec.dir\objects.rsp >>>>>>>>>> @C:\Users\mrdbgd\AppData\Local\Temp\nmF3F4.tmp >>>>>>>>>> >>>>>>>>>> LINK : fatal error LNK1181: cannot open input file 'kernel32.lib' >>>>>>>>>> >>>>>>>>>> NMAKE : fatal error U1077: 'C:\PROGRA~1\MICROS~2\VC\bin\cl.exe' : >>>>>>>>>> return >>>>>>>>>> code '0x2' >>>>>>>>>> >>>>>>>>>> Stop. >>>>>>>>>> >>>>>>>>>> NMAKE : fatal error U1077: 'C:\Windows\system32\nmake.exe' : return >>>>>>>>>> code >>>>>>>>>> '0x2' >>>>>>>>>> >>>>>>>>>> Stop. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> CMake will not be able to correctly generate this project. >>>>>>>>>> all Stack (most recent call first): >>>>>>>>>> CMakeLists-owbuild.txt:3 (project) >>>>>>>>>> CMakeLists.txt:1 (include) >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> - Configuring done >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> 2011/3/18 Chris Maciejewski <ch...@wima.co.uk> >>>>>>>>>> Hi, >>>>>>>>>> >>>>>>>>>> Can you please post error message you are getting when tying to >>>>>>>>>> build? >>>>>>>>>> >>>>>>>>>> Regards, >>>>>>>>>> Chris >>>>>>>>>> >>>>>>>>>> 2011/3/18 Veljko Milisavljević <mveljk...@gmail.com>: >>>>>>>>>> > Hi all, >>>>>>>>>> > does someone have a document on how to build >>>>>>>>>> > from sources? >>>>>>>>>> > I have downloaded : >>>>>>>>>> > QuteCom-2.2.tar.gz >>>>>>>>>> > winSDK.zip >>>>>>>>>> > qt-4.5.3 >>>>>>>>>> > pywin32-211.win32-py2.5 >>>>>>>>>> > python-2.5.2 >>>>>>>>>> > nsis-2.44 >>>>>>>>>> > dxSDK >>>>>>>>>> > cmake-2.6.0 >>>>>>>>>> > boost.1.38 >>>>>>>>>> > I am on Windows 7 >>>>>>>>>> > thanks >>>>>>>>>> > Veljko >>>>>>>>>> _______________________________________________ >>>>>>>>>> QuteCom-dev mailing list >>>>>>>>>> QuteCom-dev@lists.qutecom.org >>>>>>>>>> http://lists.qutecom.org/mailman/listinfo/qutecom-dev >>>>>>>>>> >>>>>>>>>> _______________________________________________ >>>>>>>>>> QuteCom-dev mailing list >>>>>>>>>> QuteCom-dev@lists.qutecom.org >>>>>>>>>> http://lists.qutecom.org/mailman/listinfo/qutecom-dev >>>>>>>>> >>>>>>>>> _______________________________________________ >>>>>>>>> QuteCom-dev mailing list >>>>>>>>> QuteCom-dev@lists.qutecom.org >>>>>>>>> http://lists.qutecom.org/mailman/listinfo/qutecom-dev >>>>>>>> >>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> QuteCom-dev mailing list >>>>>>>> QuteCom-dev@lists.qutecom.org >>>>>>>> http://lists.qutecom.org/mailman/listinfo/qutecom-dev >>>>>>>> >>>>>>>> >>>>>>> >>>>>>> >>>>>>> _______________________________________________ >>>>>>> QuteCom-dev mailing list >>>>>>> QuteCom-dev@lists.qutecom.org >>>>>>> http://lists.qutecom.org/mailman/listinfo/qutecom-dev >>>>>>> >>>>>>> >>>>>>> >>>>>>> <qutecom.JPG> >>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> QuteCom-dev mailing list >>>>>> QuteCom-dev@lists.qutecom.org >>>>>> http://lists.qutecom.org/mailman/listinfo/qutecom-dev >>>>>> >>>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> QuteCom-dev mailing list >>>>> QuteCom-dev@lists.qutecom.org >>>>> http://lists.qutecom.org/mailman/listinfo/qutecom-dev >>>>> >>>>> >>>> >>>> >>>> _______________________________________________ >>>> QuteCom-dev mailing list >>>> QuteCom-dev@lists.qutecom.org >>>> http://lists.qutecom.org/mailman/listinfo/qutecom-dev >>>> >>>> >>> >>> >>> _______________________________________________ >>> QuteCom-dev mailing list >>> QuteCom-dev@lists.qutecom.org >>> http://lists.qutecom.org/mailman/listinfo/qutecom-dev >>> >>> >> >> >> _______________________________________________ >> QuteCom-dev mailing list >> QuteCom-dev@lists.qutecom.org >> http://lists.qutecom.org/mailman/listinfo/qutecom-dev >> >> > > > _______________________________________________ > QuteCom-dev mailing list > QuteCom-dev@lists.qutecom.org > http://lists.qutecom.org/mailman/listinfo/qutecom-dev > >
_______________________________________________ QuteCom-dev mailing list QuteCom-dev@lists.qutecom.org http://lists.qutecom.org/mailman/listinfo/qutecom-dev
