Hi, When configuring VST Host to work with QWS, the article says: "So, in the Ports Options dialog, in the MIDI IN section, disable all the MIDI Yoke ports, but leave the MIDI OUT section alone. Then choose OK and QWS will update its configuration file with the new settings." So I went into the ports options dialog and the check boxes that said "use this port" were unchecked for both the MIDI in and MIDI out ports for MIDI Yoke. Is this right so far? The article also says: "Now, configure MIDI devices that will be used by pressing ALT-D, M, to enter the MIDI device dialog. On the input tab, select one of the MIDI Yoke ports as input." I was wanting to play the VST instruments using My Casio MIDI Keyboard. So wouldn't I just select my Yamaha USB In 01 as my MIDI input instead? The article also says: "Now, to set up each synth and tell it what MIDI Yoke to use, go to the Engine menu and select MIDI Devices." You mean the Device Menu and select MIDI or the Engine Menu and select Configure, right? Thanks for any help. Janelle
To unsubscribe or change list options, see http://lists.andrelouis.com for archived list posts, see http://www.mail-archive.com/[email protected]
