Ever since I carried my T-195 down my basement stairs, R-390s feel awfully
light :D

On Tue, Oct 7, 2025 at 5:12 PM Barry <[email protected]> wrote:

> Adam,
>
> I don't know what all might be causing those problems, but do have to
> admire anyone who can throw an R390,... well..., anywhere!
>
> Barry - N4BUQ
>
> > Hey guys,
> >
> > I appreciate the pointers on my R-392, and now that it's buttoned up,
> it's
> > time to work on my R-390. I only tested this briefly when I first got it,
> > today I threw it up on the bench. Supposedly this was restored by Rick
> > Mish, it is very clean (except the gear train, which has a lot of fresh
> > grease...), and the front panel is pristine.
> >
> > It does pull stations, but the volume is extremely low in AGC mode, and
> > gets slightly louder when placed into MGC.
> >
> > In MGC, with the BFO switched on, it plays at a normal (not super loud,
> but
> > loud) volume.
> > In AGC, with the BFO switched on, it hums, low volume audio.
> >
> > The limiter seems to have no effect, and varying the BFO doesn't do
> > anything at all no matter AGC/MGC.
> >
> > I have Tom's solid state kit installed, and B+ at the AF deck test point
> is
> > a steady 180.5vdc.
> >
> > I am going to dig out the TM's later on, I have them somewhere...but
> maybe
> > somebody here can help point me in the right direction.
> >
> > Thanks!
> >
> > Adam K2AAM
> > ______________________________________________________________
> > R-390 mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/r-390
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:[email protected]
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
>
______________________________________________________________
R-390 mailing list
Home: http://mailman.qth.net/mailman/listinfo/r-390
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Reply via email to