I just want to add that I didn't have any overful box before I use :
<<label=fig1, fig=FALSE, results = tex>>=
pdf("fig1.pdf",
width = wid, heigth = hei)
plot(1:10)
plot(1:10)
dev.off()
cat("\\begin{figure}[h]")
cat("\\centering")
cat("\\multido{\i=1+1}{7}{\includegraphics[page=\i,width=1.5in, height =
1.5in]{images.pdf}}")
cat("\\end{figure}")
@
but just :
\SweaveOpts{prefix.string=proj1}
<<label=fig1,fig=T,include=F,width=1.5, height=1.5>>=
plot(1:10)
@
\begin{figure}[h]
\multido{\i=1+1}{7}{\includegraphics[page=\i,width=1.5in, height =
1.5in]{images.pdf}}
\end{figure}
I don't know if this information can help... Thanks a lot everyone.
Subject: RE: [R] using Sweave, how to save a plot in a given size
Date: Wed, 15 Apr 2009 16:29:38 +0200
From: [email protected]
To: [email protected]; [email protected]
This seems more a LaTeX problem than an R problem. But can you
provide us (an sample example of) the LaTeX code the yields the overfull
box.
Van: Lore M [mailto:[email protected]]
Verzonden: woensdag 15 april 2009 15:44
Aan: ONKELINX,
Thierry; R Help
Onderwerp: RE: [R] using Sweave, how to save a plot in
a given size
After few corrections, it does work. But I have several plots to
include in my document and, because of those commands, they're all on the same
line even if there are 20 plots. I mean that Latex doesn't car about textwidth
anymore and I get an overfull box (too wide).
What could I do to correct that
?
Thanks.
> Subject: RE: [R] using Sweave, how to save a plot in a
given size
> Date: Wed, 15 Apr 2009 13:55:57 +0200
> From:
[email protected]
> To: [email protected];
[email protected]; [email protected]
>
> Dear
Lore,
>
> The easiest thing to do is to write a function that saves
your plot to a file and generates the latex code.
>
>
<<label=fig1, fig=FALSE, result = tex>>=
> pdf("fig1.pdf",
width = wid, heigth = hei)
> plot(1:10)
> dev.off()
>
cat("\begin{figure}\")
> cat("\includegraphics[width = ", wid, ", height =
", hei, "]{proj1-fig1}\"}
> cat("\end{figure}")
> @
>
>
HTH,
>
> Thierry
>
> -----Oorspronkelijk
bericht-----
> Van: [email protected]
[mailto:[email protected]] Namens Lore M
> Verzonden: woensdag
15 april 2009 13:46
> Aan: [email protected]; R Help
>
Onderwerp: Re: [R] using Sweave, how to save a plot in a given size
>
>
> Yes it works, but I still have a problem.
> The thing is
that I know the dimensions of my plot but in the R code, not in the latex code.
So I tried to do :
>
> \SweaveOpts{prefix.string=proj1}
>
> <<label=fig1,fig=T,include=F,width=\Sexpr{wid},
height=\Sexpr{hei}>>=
> plot(1:10)
> @
>
>
\begin{figure}
> \includegraphics {proj1-fig1} %% show
>
\end{figure}
>
> But Latex doen't find the value of "wid" and "hei"
when it creates the chunk code. But in the Latex code, it works and I do have
the right value for "wid" and "hei".
>
> Lore.
>
>
> > Date: Tue, 14 Apr 2009 12:42:16 +0200
> > From:
[email protected]
> > To: [email protected]
> > CC:
[email protected]
> > Subject: Re: [R] using Sweave, how to save a
plot in a given size
> >
> > Hi I do somthing like:
>
>
> > \SweaveOpts{prefix.string=proj1}
> >
> >
<<label=fig1,fig=T,include=F,width=8, height=12>>=
> >
plot(1:10)
> > @
> >
> > \begin{figure}
> >
\includegraphics {proj1-fig1} %% show
> > \label{..}
> >
\end{figure}
> >
> >
> > Wolfgang
> >
> >
> > Lore M a écrit :
> > >
> >
>
> > >
> > >
> > >
> >
>
> > > Hi,
> > >
> > > I'm trying to
realise a repport with R and Latex (TeXnicCenter and Miktex for Windows) using
Sweave().
> > > I'd like to save my plots in a given size. How can
I do that ? The code is :
> > >
> > >
\SweaveOpts{prefix.string = figs/plot, eps = FALSE, pdf = TRUE}
> >
> <<partI, echo=FALSE ,fig=TRUE, include=FALSE>>=
> >
> plotFunction()
> > > @
> > >
\includepdf[pages=-]{figs/plot-partI}
> > >
> > > When I
use par(pin=c(width,height)), I get the plot with the right size but saved in a
too big pdf page (7in x 7in, the default size of the window).
> > >
So I tried to change the size of the window with the command windows() but
then,
Sweave can't save the plot correctly.
> > >
> > > Thanks
everyone.
> > >
> > > Lore.
Souhaitez vous « être au bureau sans y être » ? Oui
je le veux !
Dit bericht en eventuele bijlagen geven enkel de visie van de schrijver weer
en binden het INBO onder geen enkel beding, zolang dit bericht niet bevestigd is
door een geldig ondertekend document. The views expressed in this message
and any annex are purely those of the writer and may not be regarded as stating
an official position of INBO, as long as the message is not confirmed by a duly
signed document.
_________________________________________________________________
Inédit ! Des Emoticônes Déjantées! Installez les dans votre Messenger !
[[alternative HTML version deleted]]
______________________________________________
[email protected] mailing list
https://stat.ethz.ch/mailman/listinfo/r-help
PLEASE do read the posting guide http://www.R-project.org/posting-guide.html
and provide commented, minimal, self-contained, reproducible code.
