On Mon, 19 Jul 1999 22:46:35 +1000, tom minchin wrote:
>On Mon, Jul 19, 1999 at 11:52:08PM +1000, Gary wrote:
>> I have just installed radiator for the first time.
>>
>> I also have just installed a new tigris.
>>
>> Has anyone managed to get a CLID authorisation only session going on a
>> tigris ??
>>
>
>You can use the Calling-Station-Id RADIUS check item, eg:
>
>fred Password = "mypasswd", Calling-Station-Id = "3454563453"
>
>This is standard RADIUS, and your Tigris will need to send the CLID when
>it authenticates against your RADIUS server.
>
>[EMAIL PROTECTED]
>
On Mon, 19 Jul 1999 22:46:35 +1000, tom minchin wrote:
>On Mon, Jul 19, 1999 at 11:52:08PM +1000, Gary wrote:
>> I have just installed radiator for the first time.
>>
>> I also have just installed a new tigris.
>>
>> Has anyone managed to get a CLID authorisation only session going on a
>> tigris ??
>>
>
>You can use the Calling-Station-Id RADIUS check item, eg:
>
>fred Password = "mypasswd", Calling-Station-Id = "3454563453"
>
>This is standard RADIUS, and your Tigris will need to send the CLID when
>it authenticates against your RADIUS server.
>
>[EMAIL PROTECTED]
>
Not actually what I want....
I have been using with the ascend radius & Ascend MAX's
#
740xxxxxx Password = "Ascend-CLID"
User-Service = Dialout-Framed-User,
User-Name = "username",
Ascend-Data-Svc = Switched-modem,
Framed-Protocol = PPP,
Framed-Routing = None,
Ascend-Assign-IP-Pool = 1,
Framed-Compression = Van-Jacobsen-TCP-IP,
Ascend-Maximum-Time = 14400,
Ascend-Idle-Limit = 900
#
The Max will generate an authentication request JUST on the telephone
number, before the modems even sync and the ascend radius will
authenticate the caller JUST BASED on the caller-id received.
I actually think the problem might be how to get the Tigris to act in a
similar manner to the Ascend.
Gary
-------------------------------
Ausmail
Your virtual home on the net.
Email, News & Home pages.
-------------------------------
Coming soon !!
===
Archive at http://www.thesite.com.au/~radiator/
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.
