On Fri, Jul 30, 1999 at 12:25:20PM +0200, DAVID PARAJE wrote:
> DAVID PARAJE wrote:
>
> > My name is David and i'm from Unisource, Spain. I have some questions
> > about Radius Radiator and i hope anyone can help me.
> >
> > I want to limitate the simultaneous use of my clients, but i dont know
> > how can i
> > do it. I am working in a Solaris and AUTH BY FILE.
> >
> > I have read some questions about this problem and, for example, when i
> > write DefaultSimultaneousUse 1 (to limit acces to 1) and stop and start
> > radius, there are a ERROR in the logfile that say that don't recognice
> > that command.
> >
> > Some question:
> > Do i have to configure SNMP in my Acces Server (cisco) and in the
> > Radius?
> > Do i have to add in the dictionary file some words (like
> > DefaultSimultaneousUse or Simultaneous-Use)?
> > And, in a few words, what i have to do to limit access, please????
Not a lot. This in your radius.cfg:
<SessionDatabase DBM>
Filename /path/where/the/database/file/will/live
</SessionDatabase>
Then for each user add:
Simultaneous-Use = 1
(or use AddToReply and save some work)
I'd recommend enabling SNMP on your Cisco's as that will allow Radiator to
double check before rejecting a user for exceeding the Simultaneous-Use
check. The manual is pretty good in this respect. But you don't have to
use SNMP - just have to access the odd reject if your network/NAS/Server
drops the odd Stop packet.
[EMAIL PROTECTED]
===
Archive at http://www.thesite.com.au/~radiator/
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.
