Hello,
I'm trying to get radwho.cgi to report all online users. I have 3
Computone power racks, 1 Livingston Portmaster 3's and 2 USR total
control access servers. The Computones and Livingston show up ok, but
I'm not getting anything from the USR. I thought I'd change the Trace
level to 3 to see if any errors would show up, and they did. I'm now
getting thousands of errors like the one below. Can anyone tell me what
I've done wrong? I've also noticed that the livingston portmaster is
authenticating trough the secondary radius server most times. Can
anyone shed some light on this??
Sun Sep 12 13:57:58 1999: WARNING: Bad authenticator in request from
xxx.xxx.xxx.xx (
Sun Sep 12 13:57:59 1999: DEBUG: Packet dump:
*** Received from xxx.xxx.xxx.xx port 1646 ....
Code: Accounting-Request
Identifier: 40
Authentic: <250><145>$@s<203>N~<28><225>|<229><144><23><239><9>
Attributes:
User-Name = "unauthenticated"
NAS-IP-Address = xxx.xxx.xxx.xx
Acct-Status-Type = Stop
Acct-Session-Id = "76"
Acct-Delay-Time = 1588320
Service-Type = Framed-User
NAS-Port-Type = ISDN
NAS-Port = 1
USR-Interface-Index = 1257
USR-Chassis-Call-Slot = 1
USR-Chassis-Call-Span = 1
USR-Chassis-Call-Channel = 1
USR-Unauthenticated-Time = 4
USR-Modem-Training-Time = 4
Calling-Station-Id = ""
Called-Station-Id = "6652030"
USR-Modulation-Type = 0
USR-Simplified-MNP-Levels = synchronousNone
USR-Simplified-V42bis-Usage = NONE
USR-Connect-Speed = 64000_BPS
Framed-Protocol = PPP
Framed-IP-Address = 0.0.0.0
Acct-Session-Time = 8
Acct-Terminate-Cause = User-Request
Acct-Input-Octets = 91
Acct-Output-Octets = 72
Acct-Input-Packets = 4
Acct-Output-Packets = 3
Call-Arrived-time = 36412596
Call-Lost-time = 36412600
Thanks in advance for any help..
===
Archive at http://www.thesite.com.au/~radiator/
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.
