You will need to use a RADIUS dictionary with these attributes
defined. I use Ascend MAX 40XX boxes and Radiator; I use the
Ascend dictionary and everything works nicely.
John
At 01:27 PM 10/1/99 -0500, you wrote:
>
>We just put an Ascend TNT Max online, and noticed there is not a whole lot
>of useful information logged to Radiator for each user:
>
>Fri Oct 1 03:19:54 1999
> Client-Id = 208.206.76.115
> NAS-Port = 32
> NAS-Port-Type = Async
> Acct-Status-Type = Stop
> Acct-Delay-Time = 0
> Acct-Session-Id = "305220639"
> Calling-Station-Id = "3189496885"
> Called-Station-Id = "2134510"
> Timestamp = 938765994
>
>Fri Oct 1 13:16:56 1999
> User-Name = "guest"
> NAS-IP-Address = 208.206.76.115
> NAS-Port = 32
> NAS-Port-Type = Async
> Acct-Status-Type = Start
> Acct-Delay-Time = 0
> Acct-Session-Id = "305220640"
> Acct-Authentic = RADIUS
> Ascend-Modem-PortNo = 32
> Ascend-Modem-SlotNo = 4
> Ascend-Modem-ShelfNo = 1
> Calling-Station-Id = "3182132642"
> Called-Station-Id = "2134510"
> Framed-Protocol = PPP
> Framed-IP-Address = 208.242.78.246
> Timestamp = 938801816
>
>
>How can I get it to log the connect speeds, such as:
>
>ATTRIBUTE Ascend-Xmit-Rate 255 integer Ascend
>ATTRIBUTE Ascend-Data-Rate 197 integer Ascend
>
>
>Is their something you have to do either on the Radtiator end or TNT end
>to enable additional logging of information?
>
>Brian
>
>
>-----------------------------------------------------
>Brian Feeny (BF304) [EMAIL PROTECTED]
>318-222-2638 x 109 http://www.shreve.net/~signal
>Network Administrator ShreveNet Inc. (ASN 11881)
>
>
>
>===
>Archive at http://www.thesite.com.au/~radiator/
>To unsubscribe, email '[EMAIL PROTECTED]' with
>'unsubscribe radiator' in the body of the message.
===
Archive at http://www.thesite.com.au/~radiator/
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.
