Hi,
I have just installed Radiator on an NT box with Platypus running alongside. I have
successfully tested the ODBC functionality and authenticated users with radpwtst.
When I cut over one of the Cisco AS5200s to use the Radiator I was unable to reliably
authenticate users and when I did the user could not go anywhere. The user could not
ping the Radiator server either.
I have attached 2 trace 4s from radpwtst. One is for a 56k user using 1 port and the
other is for an ISDN user (router). The NAS-IP-Address value is not the IP assigned
to the AS5200, Radiator Server, or any other device on our networks. We do not own
that class C.
Can anyone help me with this configuration!!! I am using RadiusNT on Platypus and the
emarld.cfg modified for our use.
Thanks in advance,
Robert L. Page III, President
Magnolia Belle Data Systems, Inc.
106 Halsey St.
Brewton, AL 36426
(334) 867-8098 fax (334) 867-8151
Code: Access-Request
Identifier: 60
Authentic: 1234567890123456
Attributes:
User-Name = "ROADPAGE"
Service-Type = Framed-User
NAS-IP-Address = 203.63.154.1
NAS-Port = 1234
NAS-Port-Type = Async
User-Password =
"<164><153><165><10><27>H<3>@<202><25><178><205>j<151><166><154>"
sending Access-Request...
OK
Code: Access-Accept
Identifier: 60
Authentic: <15><231><157>=<216><178><172><3><216><189><208><213><175>"<212><4>
Attributes:
Framed-IP-Address = 255.255.255.254
Port-Limit = 1
Framed-Protocol = PPP
Framed-IP-Netmask = 255.255.255.0
Service-Type = Framed-User
Framed-Routing = None
Framed-Compression = Van-Jacobson-TCP-IP
Framed-MTU = 1500
Session-Timeout = 21600
Idle-Timeout = 900
Code: Accounting-Request
Identifier: 61
Authentic: <0><0><0><0><0><0><0><0><0><0><0><0><0><0><0><0>
Attributes:
User-Name = "ROADPAGE"
Service-Type = Framed-User
NAS-IP-Address = 203.63.154.1
NAS-Port = 1234
NAS-Port-Type = Async
Acct-Session-Id = "00001234"
Acct-Status-Type = Start
sending Accounting-Request Start...
OK
Code: Accounting-Response
Identifier: 61
Authentic: <234><130><9>r"<162><224><251><151>-<234><226><141><229>=<186>
Attributes:
Code: Accounting-Request
Identifier: 62
Authentic: <0><0><0><0><0><0><0><0><0><0><0><0><0><0><0><0>
Attributes:
User-Name = "ROADPAGE"
Service-Type = Framed-User
NAS-IP-Address = 203.63.154.1
NAS-Port = 1234
NAS-Port-Type = Async
Acct-Session-Id = "00001234"
Acct-Status-Type = Stop
Acct-Delay-Time = 0
Acct-Session-Time = 1000
Acct-Input-Octets = 20000
Acct-Output-Octets = 30000
sending Accounting-Request Stop...
OK
Code: Accounting-Response
Identifier: 62
Authentic: <224><184><223><137><224>@<155>[<253>H<136><184>?:<230>j
Attributes:
Code: Access-Request
Identifier: 24
Authentic: 1234567890123456
Attributes:
User-Name = "PAGER"
Service-Type = Framed-User
NAS-IP-Address = 203.63.154.1
NAS-Port = 1234
NAS-Port-Type = Async
User-Password = "<163><185><151>:x<9>D<15><132><25><178><205>j<151><166><154>"
sending Access-Request...
OK
Code: Access-Accept
Identifier: 24
Authentic: !<222><147><237><184><20><8><172><210>$<237>Z&~<18><201>
Attributes:
Framed-IP-Address = 207.230.78.225
Framed-IP-Netmask = 255.255.255.248
Idle-Timeout = 0
Session-Timeout = 0
Code: Accounting-Request
Identifier: 25
Authentic: <0><0><0><0><0><0><0><0><0><0><0><0><0><0><0><0>
Attributes:
User-Name = "PAGER"
Service-Type = Framed-User
NAS-IP-Address = 203.63.154.1
NAS-Port = 1234
NAS-Port-Type = Async
Acct-Session-Id = "00001234"
Acct-Status-Type = Start
sending Accounting-Request Start...
OK
Code: Accounting-Response
Identifier: 25
Authentic: <27><209><223>!<179>4d<135><150><177>3<201><202><137>N<13>
Attributes:
Code: Accounting-Request
Identifier: 26
Authentic: <0><0><0><0><0><0><0><0><0><0><0><0><0><0><0><0>
Attributes:
User-Name = "PAGER"
Service-Type = Framed-User
NAS-IP-Address = 203.63.154.1
NAS-Port = 1234
NAS-Port-Type = Async
Acct-Session-Id = "00001234"
Acct-Status-Type = Stop
Acct-Delay-Time = 0
Acct-Session-Time = 1000
Acct-Input-Octets = 20000
Acct-Output-Octets = 30000
sending Accounting-Request Stop...
OK
Code: Accounting-Response
Identifier: 26
Authentic: o<4><139><193>KY/<215>*3<6>cG}<195>p
Attributes:
