We are receiving alot of the following warnings:

Thu Dec  2 07:56:26 1999: WARNING: No such attribute Timestamp

Every time Radiator tries to relay an accounting packet this message gets generated.

Below I have included Trace 4 output for the packet before and after.

Any Ideas?

John D
[EMAIL PROTECTED]

*** Received from 216.98.155.2 port 1097 ....
Code:       Accounting-Request
Identifier: 145
Authentic:  <130>pZ<169><149><219><217><253><242>F-<4>L<141><212>8
Attributes:
        Acct-Session-Id = "3B0246B0"
        User-Name = "brlgear"
        NAS-Identifier = "216.98.155.2"
        NAS-Port = 21
        NAS-Port-Type = Async
        Acct-Status-Type = Stop
        Acct-Session-Time = 996
        Acct-Authentic = RADIUS
        Connect-Info = "44000 LAPM/V42BIS"
        Acct-Input-Octets = 194170
        Acct-Output-Octets = 898353
        Acct-Terminate-Cause = User-Request
        Livingston-Acct-Terminate-Cause = "User Request - Call Circuit Closed"
        Service-Type = Framed-User
        Framed-Protocol = PPP
        Framed-IP-Address = 216.98.155.36
        Acct-Delay-Time = 0

Thu Dec  2 07:56:26 1999: DEBUG: Rewrote user name to brlgear
Thu Dec  2 07:56:26 1999: DEBUG: Handling request with Handler 'Realm='
Thu Dec  2 07:56:26 1999: DEBUG: SDB2 Deleting session for brlgear, 216.98.155.2, 21
Thu Dec  2 07:56:26 1999: DEBUG: do query is: delete from RADONLINE where 
NASIDENTIFIER='216.98.155.2' and NASPORT=21

Thu Dec  2 07:56:26 1999: DEBUG: Handling with Radius::AuthRADIUS
Thu Dec  2 07:56:26 1999: WARNING: No such attribute Timestamp
Thu Dec  2 07:56:26 1999: DEBUG: Packet dump:
*** Sending to 216.98.128.65 port 1646 ....
Code:       Accounting-Request
Identifier: 13
Authentic:  <0><0><0><0><0><0><0><0><0><0><0><0><0><0><0><0>
Attributes:
        Acct-Session-Id = "3B0246B0"
        User-Name = "brlgear"
        NAS-Identifier = "216.98.155.2"
        NAS-Port = 21
        NAS-Port-Type = Async
        Acct-Status-Type = Stop
        Acct-Session-Time = 996
        Acct-Authentic = RADIUS
        Connect-Info = "44000 LAPM/V42BIS"
        Acct-Input-Octets = 194170
        Acct-Output-Octets = 898353
        Acct-Terminate-Cause = User-Request
        Livingston-Acct-Terminate-Cause = "User Request - Call Circuit Closed"
        Service-Type = Framed-User
        Framed-Protocol = PPP
        Framed-IP-Address = 216.98.155.36
        Acct-Delay-Time = 0
        Timestamp = 944150186

===
Archive at http://www.thesite.com.au/~radiator/
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.

Reply via email to