Hello Charlie - On Wed, 15 Dec 1999, Charlie wrote: > Hello Tom and others, > > > While searching the Radiator archives on this subject I found your statement > as follows: > > Our cisco's give us gallons of stuff with the non-standard setting and > >> c5200-i-l.113-8.T1 loaded. All the connect rate stuff is from their > Ascend > >> compatibility code. > > You then provided a capture of one of your stop records as follows: > > Wed Mar 3 20:05:03 1999 > NAS-IP-Address = 203.x.x.x > NAS-Port = 19 > NAS-Port-Type = Async > User-Name = "dialup" > Called-Station-Id = "1234" > Calling-Station-Id = "4321" > Acct-Status-Type = Stop > Acct-Authentic = RADIUS > Service-Type = Framed-User > Acct-Session-Id = "00000710" > Framed-Protocol = PPP > Framed-IP-Address = 203.x.x.x > Ascend-Disconnect-Cause = 11 > Ascend-Pre-Input-Octets = 127 > Ascend-Pre-Output-Octets = 100 > Ascend-Pre-Input-Packets = 5 > Ascend-Pre-Output-Packets = 5 > Acct-Input-Octets = 102769 > Acct-Output-Octets = 180356 > Acct-Input-Packets = 383 > Acct-Output-Packets = 368 > Ascend-PreSession-Time = 3 > Acct-Session-Time = 2472 > Ascend-Data-Rate = 28800 > Ascend-Xmit-Rate = 26400 > Acct-Delay-Time = 0 > Timestamp = 920451903 > > > We have been unable to get the connect speeds reported, our stop record is > identical to yours with two exceptions, we get the the following: > > Ascend-Data-Rate = 0 > Ascend-Xmit-Rate = 0 > > Could you possibly point us in the right direction to correct this. Thank > you so much for your time. > What version of Cisco code are you running? and on what platform? Cisco has a multitude of different versions of code, all with different "feature sets". There are also many different versions of modem firmware (and even different modem hardware implementations). You will have to check all of those version numbers to see what doesn't match. hth Hugh -- Radiator: the most portable, flexible and configurable RADIUS server anywhere. SQL, proxy, DBM, files, LDAP, NIS+, password, NT, Emerald, Platypus, Freeside, TACACS+, PAM, external, etc etc on Unix, Win95/8, NT, Rhapsody === Archive at http://www.thesite.com.au/~radiator/ To unsubscribe, email '[EMAIL PROTECTED]' with 'unsubscribe radiator' in the body of the message.
