I have been unsuccessful in getting the ip address of dialup users in
the start record from a cisco access server. Using the same config file,
it does work on a USR Total Control Hub.
In the cisco detail file I get this. . .
on Aug 28 00:18:58 2000
NAS-IP-Address = x.x.x.x
NAS-Port = 15
NAS-Port-Type = Async
User-Name = "snipped"
Acct-Status-Type = Start
Acct-Authentic = RADIUS
Service-Type = Framed-User
Acct-Session-Id = "0000D3C4"
Framed-Protocol = PPP
Acct-Delay-Time = 0
Timestamp = 967439938
but on the USRobotics, I get this and they are in the same realm. . .
Sat Aug 26 00:18:24 2000
User-Name = "snipped"
NAS-IP-Address = x.x.x.x
NAS-Identifier = "blah"
Acct-Status-Type = Start
Acct-Session-Id = "169083622"
Acct-Delay-Time = 0
Acct-Authentic = RADIUS
Service-Type = Framed-User
NAS-Port-Type = Async
NAS-Port = 2581
USR-Modem-Training-Time = 19
USR-Unknown-38979 = 3837
USR-Chassis-Call-Slot = 11
USR-Chassis-Call-Span = 1
USR-Chassis-Call-Channel = 21
USR-Unauthenticated-Time = 6
Calling-Station-Id = ""
Called-Station-Id = ""
USR-VPN-Id = 0
USR-Modulation-Type = v90Digital
USR-Simplified-MNP-Levels = ccittV42
USR-Simplified-V42bis-Usage = ccittV42bis
USR-Connect-Speed = 44000_BPS
Framed-Protocol = PPP
Framed-IP-Address = 200.200.211.53 <----------IT WORKS
HERE!!!!
VTS-Session-Key =
":E<228><152><240><3>3<132>q^<31><130>1<186><156><143>"
Call-Arrived-time = 146828507
Timestamp = 967267104
This is my config file:
**************************************************
# radius.cfg
#
# Configuration file for radiator radius server
#
Trace 3
PidFile /usr/etc/radius/radiusd.pid
AuthPort 1645
AcctPort 1646
LogDir /var/adm/radius
DbDir /usr/etc/radius/raddb
LogFile %L/logfile
DictionaryFile %D/dictionary
##################################################
<Client xxx.xxx.xxx.xxx>
Secret secret
DefaultRealm cisco
</Client>
###################################################
<SessionDatabase DBM>
Filename %D/online
Identifier SDB1
</SessionDatabase>
<Realm cisco>
MaxSessions 1
AcctLogFileName %L/log/%c/detail
SessionDatabase SDB1
RejectHasReason
PasswordLogFileName %L/p.log
<AuthBy FILE>
Filename %D/users.cisco
</AuthBy>
</Realm>
##################################################
<AuthBy SYSTEM>
Identifier System
</AuthBy>
**********************************************************************
This is what I for default dialup users:
DEFAULT Auth-Type = System
Service-Type = Framed-User,
Framed-Protocol = PPP,
Framed-IP-Address = 255.255.255.254,
Framed-IP-Netmask = 255.255.255.255,
Framed-Routing = None,
Framed-Compression = Van-Jacobsen-TCP-IP,
Framed-MTU = 1500,
Idle-Timeout = 900,
Session-Timeout = 21600
Thanks for any help you can give me.
Tim
_______________
Timothy Payton
[EMAIL PROTECTED]
===
Archive at http://www.starport.net/~radiator/
Announcements on [EMAIL PROTECTED]
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.
