Hello Timothy -
This is a Cisco configuration issue that has been discussed on the
list before. There is a configuration option you need to set, so do a
search on the archive:
http://www.starport.net/~radiator
regards
Hugh
At 0:47 -0500 27/8/00, Timothy Payton wrote:
>I have been unsuccessful in getting the ip address of dialup users in
>the start record from a cisco access server. Using the same config file,
>it does work on a USR Total Control Hub.
>
>In the cisco detail file I get this. . .
>
>on Aug 28 00:18:58 2000
> NAS-IP-Address = x.x.x.x
> NAS-Port = 15
> NAS-Port-Type = Async
> User-Name = "snipped"
> Acct-Status-Type = Start
> Acct-Authentic = RADIUS
> Service-Type = Framed-User
> Acct-Session-Id = "0000D3C4"
> Framed-Protocol = PPP
> Acct-Delay-Time = 0
> Timestamp = 967439938
>
>but on the USRobotics, I get this and they are in the same realm. . .
>
>Sat Aug 26 00:18:24 2000
> User-Name = "snipped"
> NAS-IP-Address = x.x.x.x
> NAS-Identifier = "blah"
> Acct-Status-Type = Start
> Acct-Session-Id = "169083622"
> Acct-Delay-Time = 0
> Acct-Authentic = RADIUS
> Service-Type = Framed-User
> NAS-Port-Type = Async
> NAS-Port = 2581
> USR-Modem-Training-Time = 19
> USR-Unknown-38979 = 3837
> USR-Chassis-Call-Slot = 11
> USR-Chassis-Call-Span = 1
> USR-Chassis-Call-Channel = 21
> USR-Unauthenticated-Time = 6
> Calling-Station-Id = ""
> Called-Station-Id = ""
> USR-VPN-Id = 0
> USR-Modulation-Type = v90Digital
> USR-Simplified-MNP-Levels = ccittV42
> USR-Simplified-V42bis-Usage = ccittV42bis
> USR-Connect-Speed = 44000_BPS
> Framed-Protocol = PPP
> Framed-IP-Address = 200.200.211.53 <----------IT WORKS
>HERE!!!!
> VTS-Session-Key =
>":E<228><152><240><3>3<132>q^<31><130>1<186><156><143>"
> Call-Arrived-time = 146828507
> Timestamp = 967267104
>
>
>This is my config file:
>
>**************************************************
>
># radius.cfg
>#
># Configuration file for radiator radius server
>#
>
>Trace 3
>PidFile /usr/etc/radius/radiusd.pid
>AuthPort 1645
>AcctPort 1646
>LogDir /var/adm/radius
>DbDir /usr/etc/radius/raddb
>LogFile %L/logfile
>DictionaryFile %D/dictionary
>
>##################################################
>
><Client xxx.xxx.xxx.xxx>
> Secret secret
> DefaultRealm cisco
></Client>
>
>###################################################
><SessionDatabase DBM>
> Filename %D/online
> Identifier SDB1
></SessionDatabase>
>
><Realm cisco>
> MaxSessions 1
> AcctLogFileName %L/log/%c/detail
> SessionDatabase SDB1
> RejectHasReason
> PasswordLogFileName %L/p.log
> <AuthBy FILE>
> Filename %D/users.cisco
> </AuthBy>
></Realm>
>
>##################################################
>
><AuthBy SYSTEM>
> Identifier System
></AuthBy>
>
>**********************************************************************
>
>
>This is what I for default dialup users:
>
>
>DEFAULT Auth-Type = System
> Service-Type = Framed-User,
> Framed-Protocol = PPP,
> Framed-IP-Address = 255.255.255.254,
> Framed-IP-Netmask = 255.255.255.255,
> Framed-Routing = None,
> Framed-Compression = Van-Jacobsen-TCP-IP,
> Framed-MTU = 1500,
> Idle-Timeout = 900,
> Session-Timeout = 21600
>
>Thanks for any help you can give me.
>
>
>Tim
>
>_______________
>Timothy Payton
>[EMAIL PROTECTED]
>
>===
>Archive at http://www.starport.net/~radiator/
>Announcements on [EMAIL PROTECTED]
>To unsubscribe, email '[EMAIL PROTECTED]' with
>'unsubscribe radiator' in the body of the message.
--
--
Radiator: the most portable, flexible and configurable RADIUS server
anywhere. SQL, proxy, DBM, files, LDAP, NIS+, password, NT, Emerald,
Platypus, Freeside, Interbiller, TACACS+, PAM, external, etc, etc.
Available on Unix, Linux, FreeBSD, Windows 95/98/2000, NT, MacOS X.
===
Archive at http://www.starport.net/~radiator/
Announcements on [EMAIL PROTECTED]
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.
