Dear Hugh,
Tnx a lot for your suggestion.
But can you tell how I can add those attributes to NAS and where I have make
changes in NAS.
Regards
AbdusSami
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On
Behalf Of Hugh Irvine
Sent: Tuesday, February 20, 2001 3:48 AM
To: Mohammed AbdusSami
Cc: [EMAIL PROTECTED]
Subject: RE: (RADIATOR) Re:
Hello AdbusSami -
Thank you for sending the debug output, but it just demonstrates what
I pointed out in my previous mail, in that you are only sending back
to the NAS a Framed-IP-Address and Framed-IP-Netmask in the
Access-Accept:
Mon Feb 19 09:42:53 2001: DEBUG: Access accepted for [EMAIL PROTECTED]
Mon Feb 19 09:42:53 2001: DEBUG: Packet dump:
*** Sending to 212.24.225.118 port 1645 ....
Code: Access-Accept
Identifier: 20
Authentic: <147>2<238><21>4J<5><134><144><133>N~Q<237>@0
Attributes:
Framed-IP-Netmask = 255.255.255.192
Framed-IP-Address = 172.16.1.106
You will need to add at least these additional attributes:
Service-Type = Framed-User,
Framed-Protocol = PPP,
Session-Timeout = nnnn,
Idle-Timeout = nnn,
Framed-Compression = Van-Jacobson-TCP-IP
There may also be some configuration required on your NAS to allow it
to accept IP addresses from radius.
hth
Hugh
At 16:52 +0300 01/2/19, Mohammed AbdusSami wrote:
>Dear Hugh,
>
>Please find attached file of trace 4 debug logfile. The error message what
I
>am getting when trying to connect through dialup is
>"the connection was closed"...
>
>Waiting for solution.
>
>Regards
>
>AbdusSami
>
>
>-----Original Message-----
>From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On
>Behalf Of Hugh Irvine
>Sent: Monday, February 19, 2001 4:27 AM
>To: Mohammed AbdusSami
>Cc: [EMAIL PROTECTED]
>Subject: RE: (RADIATOR) Re:
>
>
>
>Hello AbdusSami -
>
>At 18:07 +0300 01/2/18, Mohammed AbdusSami wrote:
>>Dear Hugh,
>>
>>Please have a look on attached configuration file. Actually I am trying to
>>use for assigning dynamic IP address pool. It is rejected the connection.
>>Could you please suggest me to solve this problem.
>
>I cannot see anything wrong with your configuration file, but I
>suspect your NAS probably requires some additional reply attributes
>in the Access-Accept to start a session. Usual attributes include
>something like this:
>
> Service-Type = Framed-User,
> Framed-Protocol = PPP,
> Session-Timeout = nnnn,
> Idle-Timeout = nnn,
> Framed-Compression = Van-Jacobson-TCP-IP
>
>I will need to see a complete trace 4 debug from Radiator to see what
>is happening (you should also check a debug on your NAS to see what
>it says).
>
>hth
>
>Hugh
>
>--
>
>NB: I am travelling this week, so there may be delays in our
correspondence.
>
>Radiator: the most portable, flexible and configurable RADIUS server
>anywhere. SQL, proxy, DBM, files, LDAP, NIS+, password, NT, Emerald,
>Platypus, Freeside, Interbiller, TACACS+, PAM, external, etc, etc.
>Available on Unix, Linux, FreeBSD, Windows 95/98/2000, NT, MacOS X.
>
>===
>Archive at http://www.starport.net/~radiator/
>Announcements on [EMAIL PROTECTED]
>To unsubscribe, email '[EMAIL PROTECTED]' with
>'unsubscribe radiator' in the body of the message.
>
>Content-Type: application/octet-stream;
> name="logfile"
>Content-Disposition: attachment;
> filename="logfile"
>
>Attachment converted: Macintosh HD:logfile 4 (????/----) (0001259E)
--
NB: I am travelling this week, so there may be delays in our correspondence.
Radiator: the most portable, flexible and configurable RADIUS server
anywhere. SQL, proxy, DBM, files, LDAP, NIS+, password, NT, Emerald,
Platypus, Freeside, Interbiller, TACACS+, PAM, external, etc, etc.
Available on Unix, Linux, FreeBSD, Windows 95/98/2000, NT, MacOS X.
===
Archive at http://www.starport.net/~radiator/
Announcements on [EMAIL PROTECTED]
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.
===
Archive at http://www.starport.net/~radiator/
Announcements on [EMAIL PROTECTED]
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.
