Hi,
Due to a particular network provider not support any type
of routing protocol, is there any easy way to assign a
Framed-Route when a customer dials in.
I.E. This is what we normally have:
customer@domain User-Password = "12345678"
Service-Type = Framed-User,
Framed-Protocol = PPP,
Framed-IP-Address = 203.203.203.203,
Framed-Route = "204.204.204.148/30 0.0.0.0
1"
The network provider does not support the Framed-Route,
therefore that subnet will not route to the customer.
We thought we could do something like this, but it does
not appear to work (which seems obvious), but running
out of options to try.
customer@domain User-Password = "12345678"
Service-Type = Framed-User,
Framed-Protocol = PPP,
Framed-IP-Address = 203.203.203.203,
Framed-IP-Address = 204.204.204.148,
Framed-Netmask = 255.255.255.252
Is there any other way as the assigned ip and routed
subnet are different?
Thanks,
Paul
===
Archive at http://www.open.com.au/archives/radiator/
Announcements on [EMAIL PROTECTED]
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.
