Hello Paul -
This is entirely a NAS issue. If the NAS does not support the specification of a Framed-Route with radius, then there is nothing you can do with Radiator to make it happen. You will have to check with your vendor what is supported. If you happen to be using Cisco's however, you should be aware that you can do lots of additional things with cisco-avpair's - check the Cisco web site for what is supported in your IOS version. hth Hugh On Thursday 11 October 2001 16:45, Paul Thorton wrote: > Hi, > > Due to a particular network provider not support any type > of routing protocol, is there any easy way to assign a > Framed-Route when a customer dials in. > > I.E. This is what we normally have: > > customer@domain User-Password = "12345678" > Service-Type = Framed-User, > Framed-Protocol = PPP, > Framed-IP-Address = 203.203.203.203, > Framed-Route = "204.204.204.148/30 0.0.0.0 > 1" > > The network provider does not support the Framed-Route, > therefore that subnet will not route to the customer. > > We thought we could do something like this, but it does > not appear to work (which seems obvious), but running > out of options to try. > > customer@domain User-Password = "12345678" > Service-Type = Framed-User, > Framed-Protocol = PPP, > Framed-IP-Address = 203.203.203.203, > Framed-IP-Address = 204.204.204.148, > Framed-Netmask = 255.255.255.252 > > Is there any other way as the assigned ip and routed > subnet are different? > > Thanks, > > Paul > === > Archive at http://www.open.com.au/archives/radiator/ > Announcements on [EMAIL PROTECTED] > To unsubscribe, email '[EMAIL PROTECTED]' with > 'unsubscribe radiator' in the body of the message. -- Radiator: the most portable, flexible and configurable RADIUS server anywhere. Available on *NIX, *BSD, Windows 95/98/2000, NT, MacOS X. - Nets: internetwork inventory and management - graphical, extensible, flexible with hardware, software, platform and database independence. === Archive at http://www.open.com.au/archives/radiator/ Announcements on [EMAIL PROTECTED] To unsubscribe, email '[EMAIL PROTECTED]' with 'unsubscribe radiator' in the body of the message.
