We are doing something similar, However we are proxying requests via RADIATOR to another RADIUS server and use a ReplyHook to rewrite the Tunnel Parameters.
I can post the files if you like. -- Neil Johnson Network Engineer Information Technology Services The University of Iowa 319 384-0938 [email protected] > -----Original Message----- > From: [email protected] [mailto:radiator- > [email protected]] On Behalf Of Patrick Renkens > Sent: Friday, November 12, 2010 10:32 AM > To: [email protected] > Subject: [RADIATOR] Dynamically assign VLAN to wireless clients > > > Hi All, > > We would like to dynamically assign VLAN's to wireless clients. > All of the authentication process (inner and outer tunnel etc.) runs > OK, > but the last step should be assigning a dynamic VLAN ID > (Tunnel-Private-Group-ID) to the client in a short range of ID's. > > Can this be done, and if so, how? > > I already wrote a small PostAuthHook that can generate a random VLAN-ID > within this short range of ID's. It replaces the default > Tunnel-Private-Group-ID in the reply-packet with the generated ID, but > it doesn't do the trick. It does replace the Tunnel-Private-Group-ID > but > is has no affect on the process (so it seems). > > The reason for this feature is that the current VLAN is too small and > we > prefer to have several VLAN's for the wireless clients instead of a > much > larger single VLAN. > > Any other ideas or workarounds are also appreciated. > > Kind regards, > Patrick Renkens > Centre for Information Services (UCI) > Radboud University Nijmegen, Netherlands > > > _______________________________________________ > radiator mailing list > [email protected] > http://www.open.com.au/mailman/listinfo/radiator _______________________________________________ radiator mailing list [email protected] http://www.open.com.au/mailman/listinfo/radiator
