Well, after quite a happy week of having the new firmware release r9009 I found my alarm working again after a several months of it not working. (Wrong sounds/alarms being played, sometimes not even going off at all, or the radio not staying on for more than a couple of minutes afterwards before it turned itself off again).
So I was quite happy. Last night I had to set an earlier 'one-off' alarm for 5:30am. My normal alarm is set for 7:30, six days a week and uses the 'Natural Sounds' application for the alarm sound. The one-off alarm was also using 'Natural Sounds'. 5:30am came along, the alarm went off and played a different musical natural sound to what I had selected. I switched to playing the radio which it did and then one minute later the unit when into standby mode. I turned the radio back on, this time it stayed on for about 10/15 minutes and went into standby again. This continued for the next hour or so. The 7:30 alarm came along then too and although it played the correct sound, it too turned off within a minute or so. Again, switching to the radio afterwards exhibited the same random switching to standby mode every 10 to 15 minutes. Very frustrating. I can't understand why this product can be so buggy. Especially the alarm itself. I can understand that sometimes an internet radio stream may not be there and it has to fail over to something else but I'm using the basic alarm sounds. I have tried countless factory resets, firmware reloads and msb.com clear downs. Nothing really makes any difference. -- gcparris ------------------------------------------------------------------------ gcparris's Profile: http://forums.slimdevices.com/member.php?userid=38855 View this thread: http://forums.slimdevices.com/showthread.php?t=81273 _______________________________________________ Radio mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/radio
