Pascal Hibon;601068 Wrote: 
> If the Radio isn’t able to stream your radio station it will play a
> local backup sound.
Well, the problem regarding this theory is that there are cases where
the alarm is not played at all or for such a short time that it's
indeed not audible, especially if the fade in works for a change.

In 99.999% of these cases, there is nothing to be found in the router
logs that would explain this behavior and usually the Radio can play
the stream instantly and without further chokes if it was started
manually.

Besides, the typical failure in my case is that the Radio starts to
fade in several minutes before the programmed alarm for a few seconds
and then stops again. With a probability of like 40%, it will then
continue with the programmed stream (without fade in), with 55%
likelihood it will then play the fallback alarm at full volume and in
the remaining 5% it stays silent.

There were some cases where the Radio didn't react to anything or
claimed it was not connected to MYSB or had no WLAN although it still
could be partially controlled via the MYSB remote control. But the
usual case is that the Radio can immediately play any stream if I press
a preset button.

Now sorry, you can shift the blame for this to my rock stable internet
connection or whatever, but to me it's obvious that the Radio is buggy
to its core.

Maybe the different behavior (if there really is one) can be explained
by tolerances e.g. regarding the accuracy of the time base for the 2nd
CPU (I wouldn't call it a realtime clock). Anyway, if Logitech builds
hardware with such tolerances, they should feel the need to implement a
design that can handle them.


-- 
0xdeadbeef
------------------------------------------------------------------------
0xdeadbeef's Profile: http://forums.slimdevices.com/member.php?userid=2287
View this thread: http://forums.slimdevices.com/showthread.php?t=83711

_______________________________________________
Radio mailing list
[email protected]
http://lists.slimdevices.com/mailman/listinfo/radio

Reply via email to