Hi, one of my three squeezbox radios had these wifi woes also for quite a while, and they could not be solved by adjusting WLAN settings, positioning of the radio, etc. ,.. once I opened the radio I found that there was a big chunk of exessive solder sitting on the active WLAN Antenna soldering point, overlapping the surrounding ground area, though this was still isolated as measuered by an ohm meter, this solder blob acted at this frequency as a capacitor to ground, which either drains incommig RF energy or alters the resonator characteristics of the wlan antenna in the 2.4 Ghz range, you can see it in this picture:
http://www.smallnetbuilder.com/myincludes/image_page.php?/images/stories/multimedia/logitech_sqz_radio/logitech_sqz_radio_board.jpg once I removed the exessive solder with a soldering iron, everything was fine!! so at least in my case it was a very simple Hardware problem,.. best wishes pbg4 ------------------------------------------------------------------------ pbg4's Profile: http://forums.slimdevices.com/member.php?userid=62543 View this thread: http://forums.slimdevices.com/showthread.php?t=100731 _______________________________________________ Radio mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/radio
