Thanks.
Eth1 isnt setup:
Code:
--------------------
# /lib/atheros/bmiloader --timeout=2 -i eth1 --info
bmiloader is waiting for Target....
bmiloader: eth1: No such device
--------------------
lsmod returns the same on the 2 radios, defective and OK:
Code:
--------------------
# lsmod
Module Size Used by Not tainted
ar6000 142684 0
--------------------
ar6k_wlan error on the defective device:
DEFECTIVE RADIO
Code:
--------------------
# dmesg
[ 13.948050] Requesting msp430 firmware msp430-0007.txt(version 0.1)
[ 13.954378] firmware: requesting msp430-0007.txt
[ 14.208671] msp430: firmware ok (1598)
[ 16.000931] *ar6k_wlan: probe of mmc0:0001:1 failed with error -62*
[ 19.362501] eth0: enable RMII gasket
--------------------
WORKING RADIO
Code:
--------------------
# dmesg
[ 13.117760] Requesting msp430 firmware msp430-0005.txt(version 0.1)
[ 13.124090] firmware: requesting msp430-0005.txt
[ 13.447055] msp430: firmware ok (1598)
[ 16.163886] *AR6000 Reg Code = 0x40000060*
[ 23.136691] channel hint set to 2437
[ 23.182284] AR6000 connected event on freq 2437 with bssid
58:6d:8f:a0:2c:d6 listenInterval=100, beaconInterval = 100, beaconIeLen = 22
assocReqLen=50 assocRespLen =33
[ 23.197468] Network: Infrastructure
--------------------
------------------------------------------------------------------------
mcoste's Profile: http://forums.slimdevices.com/member.php?userid=12820
View this thread: http://forums.slimdevices.com/showthread.php?t=103446
_______________________________________________
Radio mailing list
[email protected]
http://lists.slimdevices.com/mailman/listinfo/radio
