Hello, As it's getting progressively harder to keep LMS installed on my main (Gentoo) home server without keeping it in a timewarp, and a spare Raspberry Pi became available, I decided to bite the bullet and set up a future-proof LMS appliance (app-Pi-ance?) on the Pi. I didn't try cloning any of the LMS settings as they're pretty basic (or so I thought...), just set it all up from scratch. I used the AUR logitechmediaserver-7.9.0 PKGBUILD (not -git) on Arch linux ARM on a Pi B+.
My receiving setup is two Radios sync'd together playing a channel each. I activated the sync initially through the UI on one of the Radios, then volume sync and the other niceties through the LMS webUI. However I've found that the behaviour is a bit different now in operation: Previously, the UI on Radio B would follow along with my physical interactions on Radio A: menu positions (I think) and, crucially, volume. I'd turn the knob on Radio A and the OSD would show on both as it changed. Now, this doesn't happen (although volume adjustment does sync); and if I then go to Radio B and adjust its volume, the starting-point is whatever was last manually set on that Radio, irrespective of what the sync'ed level may have been as set via Radio A. (Which can be a bit jarring if the levels have diverged by a lot in-between.) Now my Gentoo LMS install had evolved over a good decade, much of which these Radios weren't even present for, so I may have been the beneficiary of a quirk that's since evaporated as of more recent LMS iterations; but I'm certainly missing the more complete sync experience. Anyone know a magic trick to get it back? TIA =) ------------------------------------------------------------------------ Havin_it's Profile: http://forums.slimdevices.com/member.php?userid=12661 View this thread: http://forums.slimdevices.com/showthread.php?t=105050 _______________________________________________ Radio mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/radio
