omnium21 wrote: > > In addition to disabling "auto channel" (which always uses Channel 6 on > my AP) there's an additional setting: "Channel Bandwidth" that I'd > ignored previously. My AP defaults to "Auto + Ch X", where X varies > depending on which fixed channel id being used. If I change that setting > to "20 MHz", the connection stabilises for long periods of time. I > suspect the Auto + Ch X means that it isn't actually using a fixed > channel after all. >
Just got an Asus to replace my Google WiFi after my SB Radios started losing network connection. The Asus give greater control, so time to "play" Setting a fixed channel (that I verified was not being used by neighbors) didn't help. Radios still disconnected after about an hr. Looked into what "Channel Bandwidth" means, and yes, 20mhz is best for a 2GHz band as it only uses 1 channel (40mhz bonds 2 channels). But, not sure if the Asus was using 20 or 40 in 20/40 setting. We'll see if locking in at 20mhz works. https://www.cbtnuggets.com/blog/certifications/cisco/when-to-use-20mhz-vs-40mhz-vs-80mhz (I am not optimistic) Tony  SBTouch ♪ SBRadio ♬ ------------------------------------------------------------------------ Tony T's Profile: http://forums.slimdevices.com/member.php?userid=34544 View this thread: http://forums.slimdevices.com/showthread.php?t=97791 _______________________________________________ Radio mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/radio
