RichardDavies wrote: > I have 4 SB Radios and tried using those Vonets bridges with each one of > them. Although the programming can take a bit to figure out as you > mentioned, I eventually figured it out and was very excited to have my > radios working again. However, all but one of the devices quit working > within about 3-30 days. I even returned several of them as defective and > had them replaced and the replacements eventually quit working as well > too (that is all but the one that has somehow continued to keep > working... ) I suspect that the radio pulls just a little too much > voltage and causes them to wear out prematurely. Anyway, I just wanted > to share my experience with them. I had high hopes as they are > relatively inexpensive, but they ultimately didn't work out for me.The Radio > doesn't "pull" a voltage at all. If your Radio doesn't contain a battery you can probably use a lower voltage supply to stay within the spec of the Vonets.
Sent from my Pixel 3a using Tapatalk ------------------------------------------------------------------------ slartibartfast's Profile: http://forums.slimdevices.com/member.php?userid=35609 View this thread: http://forums.slimdevices.com/showthread.php?t=109953 _______________________________________________ Radio mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/radio
