As an employee of the Big Red check company above...
It's the either the same issue I have on Ubiquiti; turn off 802.11R or FastRoaming. Or, you're trying to use a hybrid WPA3/WPA2 key. Neither is understood by the dinosaur WiFi tech in the older I'm not sure where Actiontec buried the setting (I'm in Corp Finance, not remotely close to Tech Support. :) ), the radios will play with a device that broadcasts WiFi6, but the Boom, Classic, and Radio won't play with the 802.11R protocol specifically. I did get a chipset off eBay for my Boom with an updated firmware for 802.11R (It's an Atheros AR2413A/AR5005G/AR5BMB5 Mini PCI in the Boom and Radio), but FastRoaming causes so many issues with older electronics it's not worth the (slightly) expedited handoff between mesh nodes. A quick Google finds this. Turn it off; I'd bet your stuff will magically work. https://forums.verizon.com/t5/Fios-Internet/some-devices-not-connecting-to-SON/td-p/885613 https://forums.verizon.com/t5/Fios-Internet/Printer-Gives-an-Authentication-Error-when-SON-is-Active/td-p/902850 Actiontec (the people who actually make the routers) gives pretty robust logging; take a look at what the logs are telling you. It'll let you know where the handshake/authentication failure is. As a start, I'd switch back to WPA2PSK, and turn off fast roaming. Then re-enable each, one at a time, see where it fails. ------------------------------------------------------------------------ andybflo's Profile: http://forums.slimdevices.com/member.php?userid=68321 View this thread: http://forums.slimdevices.com/showthread.php?t=115982 _______________________________________________ Radio mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/radio
