Hi folks, Last year I commented on an issue we're seeing across many Juniper devices. I neglected to follow up on Heasley's response then but are seeing it a lot more frequently now, perhaps related to some OS upgrades or something else.
Thread was here: http://www.shrubbery.net/pipermail/rancid-discuss/2017-October/009916.html http://www.shrubbery.net/pipermail/rancid-discuss/2017-October/009922.html Looking at the last week or so of these we've had, they're on devices running 14.1X53-D4*, which is primaraily QFX5100 but also a few EX4200. Here's output from a single diff, its like this on various commands nearly every run: Index: configs/r-kettlemoraine-hub =================================================================== retrieving revision 1.144 diff -u -4 -r1.144 r-kettlemoraine-hub @@ -1,7 +1,8 @@ #RANCID-CONTENT-TYPE: juniper # # r-kettlemoraine-hub> show chassis clocks + # show chassis environment # r-kettlemoraine-hub> show chassis environment # Class Item Status # Power FPC 0 Power Supply 0 OK # FPC 0 Power Supply 1 OK Index: configs/r-lacrossecity-hub =================================================================== retrieving revision 1.108 diff -u -4 -r1.108 r-lacrossecity-hub @@ -15,9 +15,8 @@ # FPC 0 Fan 2 OK # FPC 0 Fan 3 OK # # r-lacrossecity-hub> show chassis firmware - # show chassis fpc detail # Part Type Version # FPC 0 uboot U-Boot 1.1.6 (Jun 5 2012 - 02:24:53) 1.0.0 # loader FreeBSD/PowerPC U-Boot bootstrap loader 2.4 # Index: configs/r-platteville-hub =================================================================== retrieving revision 1.274 diff -u -4 -r1.274 r-platteville-hub @@ -1,7 +1,8 @@ #RANCID-CONTENT-TYPE: juniper # # r-platteville-hub> show chassis clocks + # show chassis environment # r-platteville-hub> show chassis environment # Class Item Status # Power FPC 0 Power Supply 0 OK # FPC 0 Power Supply 1 OK Heasley, you chimed in saying the prompt may be out of sync. While I don't quite know what that means, you suggested sending output of: eval `rancid -Ct juniper device` Here that is, finally: jlogin -t 120 -c 'show chassis clocks;show chassis environment;show chassis firmware;show chassis fpc detail;show chassis hardware detail;show chassis hardware models;show chassis routing-engine;show chassis scb;show chassis sfm detail;show chassis ssb;show chassis feb detail;show chassis feb;show chassis cfeb;show chassis alarms;show system license;show system boot-messages;show system core-dumps;show version detail;show version invoke-on other-routing-engine;show configuration;file checksum md5 /var/db/scripts/*/*;file list recursive /var/db/scripts/' r-platteville-hub You may notice some additions at the end which help us track some slax scripts: file checksum md5 /var/db/scripts/*/*;file list recursive /var/db/scripts/' we've had those in place for quite some time (before this) so I'm unsure if those are related. Cheers, Chris
_______________________________________________ Rancid-discuss mailing list [email protected] http://www.shrubbery.net/mailman/listinfo/rancid-discuss
