Fri, Jul 27, 2018 at 08:18:08AM -0500, Chris Wopat: > Hi folks, > > Last year I commented on an issue we're seeing across many Juniper devices. > I neglected to follow up on Heasley's response then but are seeing it a lot > more frequently now, perhaps related to some OS upgrades or something else. > > > Thread was here: > > http://www.shrubbery.net/pipermail/rancid-discuss/2017-October/009916.html > http://www.shrubbery.net/pipermail/rancid-discuss/2017-October/009922.html > > Looking at the last week or so of these we've had, they're on devices > running 14.1X53-D4*, which is primaraily QFX5100 but also a few EX4200. > > Here's output from a single diff, its like this on various commands nearly > every run: > > > > Index: configs/r-kettlemoraine-hub > =================================================================== > retrieving revision 1.144 > diff -u -4 -r1.144 r-kettlemoraine-hub > @@ -1,7 +1,8 @@ > #RANCID-CONTENT-TYPE: juniper > # > # r-kettlemoraine-hub> show chassis clocks > + # show chassis environment > # r-kettlemoraine-hub> show chassis environment > # Class Item Status > # Power FPC 0 Power Supply 0 OK > # FPC 0 Power Supply 1 OK > Index: configs/r-lacrossecity-hub > =================================================================== > retrieving revision 1.108 > diff -u -4 -r1.108 r-lacrossecity-hub > @@ -15,9 +15,8 @@ > # FPC 0 Fan 2 OK > # FPC 0 Fan 3 OK > # > # r-lacrossecity-hub> show chassis firmware > - # show chassis fpc detail > # Part Type Version > # FPC 0 uboot U-Boot 1.1.6 (Jun 5 2012 - > 02:24:53) 1.0.0 > # loader FreeBSD/PowerPC U-Boot bootstrap > loader 2.4 > # > Index: configs/r-platteville-hub > =================================================================== > retrieving revision 1.274 > diff -u -4 -r1.274 r-platteville-hub > @@ -1,7 +1,8 @@ > #RANCID-CONTENT-TYPE: juniper > # > # r-platteville-hub> show chassis clocks > + # show chassis environment > # r-platteville-hub> show chassis environment > # Class Item Status > # Power FPC 0 Power Supply 0 OK > # FPC 0 Power Supply 1 OK > > Heasley, you chimed in saying the prompt may be out of sync. While I don't > quite know what that means, you suggested sending output of: > > eval `rancid -Ct juniper device` > > Here that is, finally: > > jlogin -t 120 -c 'show chassis clocks;show chassis environment;show chassis > firmware;show chassis fpc detail;show chassis hardware detail;show chassis > hardware models;show chassis routing-engine;show chassis scb;show chassis > sfm detail;show chassis ssb;show chassis feb detail;show chassis feb;show > chassis cfeb;show chassis alarms;show system license;show system > boot-messages;show system core-dumps;show version detail;show version > invoke-on other-routing-engine;show configuration;file checksum md5 > /var/db/scripts/*/*;file list recursive /var/db/scripts/' r-platteville-hub > > You may notice some additions at the end which help us track some slax > scripts: > > file checksum md5 /var/db/scripts/*/*;file list recursive /var/db/scripts/' > > we've had those in place for quite some time (before this) so I'm unsure if > those are related.
not likely. I presume you have a banner with something that looks like a prompt; like https://www.juniper.net/documentation/software/junos/junos93/swconfig-system-basics/configuring-a-system-login-message.html. if not, you'll have to share output with me. eval `rancid -t juniper -C hostname` &> output _______________________________________________ Rancid-discuss mailing list [email protected] http://www.shrubbery.net/mailman/listinfo/rancid-discuss
