Re: [RR] go no-go box

[Bob Triphahn]

Don't forget the strip in the middle where the car sits that has the minimum height requirement. If the wheels do not touch then the car will not slide down the track.   I saw a similar device at this past weekend's pinewood derby. It had Plexiglas for the sides.   Blessings,   Bob Triphahn   ----- Original Message ----- From: Mark W Jones To: [EMAIL PROTECTED] Sent: Monday, March 10, 2003 7:48 AM Subject: Re: [RR] go no-go box Build a box with the inside dimensions being what your limits are.. ours for So MO Dist is: 2 3/4 wide 7 1/2" long 3' high   I you used 3/8" material you could build one using these sizes. 1 Bottom  3 1/2" x 7 7/8" 1 End 3 1/2" x 3" 2 sides 3" x 7 1/2" 1 Open end top brace 3 1/2" x 3/8 x 3/8   I just measured off of the one we use. Mark Jones   , 9 Mar 2003 20:57:02 -0500 "Holistic  Trends" <[EMAIL PROTECTED]> writes: How do i build or purchase a  go  no-go box  to measure the cars for the pinewood derby official registration. Commandner carol   Mark Jones, Ozark MO, [EMAIL PROTECTED]  Download a Free Royal Ranger Database visit my website at: http://home.classicnet.net/mjones02/index.html