I found that I was freezing up with RBG95_64 to the point that it was
impossible to work. The solution for me was to run RBG95_64.exe in
Compatibility mode. Running solid since. A client is having similar
problems, so we will try the same thing. This happened with a Windows 10
Pro update two or three weeks ago.
Albert
On 2016-04-08 5:51 AM, Alastair Burr wrote:
For what it's worth:
Over the last 6-8 weeks or so I have been having problems with my
(uncompiled & single user) backup routine which inserts data to one
database as it backs up other databases.
With RBase v9.5 and Windows 10 this suddenly started being a problem
with an RMD file that dates back to Vista days and before.
My solution after a lot of investigating was to add 5 second pauses
before each reconnect to a (very) recently disconnected database. For
whatever reason this has mostly solved the problem.
I have, therefore, assumed that Windows 10 is the culprit and some
recent update 6 or 8 weeks ago caused a change in the way Windows
releases files. The time taken may vary depending on what else the
system is doing thus causing the occasional failure even with that pause.
I have only just upgraded to RBase X but my first impression is that
the same pause is needed but that's not really a surprise for what
seems to be a Windows problem.
Regards,
Alastair.
-----Original Message----- From: Brad Davidson
Sent: Friday, April 8, 2016 10:49 AM
To: [email protected]
Subject: RE: [RBASE-L] - Tips: Running R:BASE X/XE Compiled Apps in a
Multi-User Network Environment
Just a summary report for those interested in the reviving of compiled
applications in our multiuser environ.
I closely reviewed my DB backup after noon maintenance, something I
did not see during remote connection today. Sitting at the server this
morning found some indexes and constraints dropped, as well, most of
our rules. Also, operation of the program in multi user mode was
uncharacteristically pokey and discovered one of our bridged Ethernet
ports inop - bad cable - see, you can only do so much remotely - one
gets spoiled!
Anyway, re-installed RBGXE, rebuilt database from copy before
optimization, and of course, made a replacement Ethernet patch cable
and all is good.
Dan, decided - for now - to leave my years-old logic for
connect/disconnect throughout all programs in my compiled app as is.
Will beta a version per Razzak's suggestion, and your method - one
connection in external form file - to review performance pros-cons, in
near future...
Brad Davidson
-----Original Message-----
From: [email protected] [mailto:[email protected]] On
Behalf Of Brad Davidson
Sent: Friday, April 08, 2016 12:25 AM
To: [email protected]
Subject: RE: [RBASE-L] - Tips: Running R:BASE X/XE Compiled Apps in a
Multi-User Network Environment
Thanks for this, Razzak, a welcome checklist for my work today!
Brad Davidson
-----Original Message-----
From: [email protected] [mailto:[email protected]] On
Behalf Of A. Razzak Memon
Sent: Thursday, April 07, 2016 7:12 PM
To: [email protected]
Subject: [RBASE-L] - Tips: Running R:BASE X/XE Compiled Apps in a
Multi-User Network Environment
Thursday, April 7, 2016
Tips: Running R:BASE X/XE Compiled Apps in a Multi-User Network
Environment
So, you have upgraded/migrated your R:BASE 9.5 (32/64)
database(s)/compiled
application(s) to R:BASE X and R:BASE X Enterprise. Congratulations!
Remember, it took you a while to perfect the network environment and
the current setup to run your existing R:Compiled R:BASE 9.5 (32/64)
databases and applications.
Now, consider the checklist and tips to run your migrated R:BASE X and
XE databases and applications in a multi-user environment as follows:
-- Network Related
01.
If you have created a new folder to run your compiled application on
your network, make sure to assign the exact same network access
(privileges).
02.
If you are running an anti-virus utility/program, make sure to define
the same exceptions/exclusions, including the new engine DLLs and
compiled executables.
03.
Every user MUST have "full access rights" to the application folder as
well as the folder defined for TEMP (SCRATCH) folders.
04.
If everything is under one folder with full access privileges, make
sure to include "-A" option for user's desktop shortcut to run your
compiled application.
-- R:Compiler X/XE Related
05.
Using the new R:Compiler X/XE, open the compiler project (.RCP) file
and verify/update the .DAT file as well as the PATH for all resource
files, if applicable.
06.
Verify and update all sections of Additional Resources, including:
- External Form Files
- Runtime Licenses
- Plugins
07. You MUST use R:BASE X/XE Runtime Licenses, if applicable.
08. You MUST use R:BASE X/XE Plugins, if applicable.
09. Take advantage of Show Loading Window with all new options.
10. Always save your project before compiling the application.
Good luck and make sure that you are having fun!
Very Best R:egards,
Razzak
--
You received this message because you are subscribed to the Google
Groups "RBASE-L" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to [email protected].
To post to this group, send email to [email protected].
To view this discussion on the web visit
http://cp.mcafee.com/d/1jWVIi3xEedEIenKYy--YrKrhhK-OC-y_sSyztZVxZBVUSyztZBdZ5Z4SyztZVxNZxwSgzG78qpAxiI0lLNGnJ7npYKrTURbSzHI-ndLCzBB4tss_R-jpLt5NzHTbFIKesMUYOqehR-EyCJtdmZSel3PWApmU6CQjqpK_9TLuZXTLsTsSjDdqymohzlJqD4qR8D_O-8oHgz938AdFVs_4XEKnoKZtd5fCSnANblz5QhPXz8Zy-Pfol9R88FYGmzV6l9_7QaiD_bCUAdFVsY0925y21XUE8JQcO8h8eKAVQoQGh5Lc89FRtb0EzmF4_OcqJHkVsSejd7dPpFr1oO830Qn2FFtd41sQg0CiR4zh02SUgB0yq80mAcy0Md6y01I0oqd40Bllqh_E6y0gmmEq89gd46Cy0rrfD8K4Wv4Qg0PVCaNaCy0qwpB6I5vxcSYedEtdUAH77.
For more options, visit
http://cp.mcafee.com/d/FZsS76Qm7bTuhvvudTdEETvpjvhvKrhhK-YM-OYYrhhK-OC-y-yrhhK-YMU-MMr8hR3AdcOgFm0aTURbSzHI-ndXYqBXhRSvbCTPhOOyeKevW_9ITKyUNRXBQSn7eosupd78W_khjmKCHuX7axVZicHs3jqpJcTvAXTLuZXTKrKr9PCJhbc8NGSJjydqAj_Vv4cGJeHsPsi6QYKu04x2N10ZYk4mW6p48A7nisWcql8yTC44QWKBwkhHkyvV6dmRGsKr79CzCVIQJwIp41wqbxkQKCy0Kq80j9qyhEw1rs8iwhd40bi6h0o6zh00S0cd6y0iGGJ8_Q3h08bbkd44E6y3jh0dJDPAn2tfyq80pYP5oBjh0dgcOzm2LMCru76TwBPlaKv.
--
You received this message because you are subscribed to the Google Groups
"RBASE-L" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To post to this group, send email to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/rbase-l/5707C24C.5080905%40albertberry.com.
For more options, visit https://groups.google.com/d/optout.
