Of course I checked that out, Razzak. It was the first thing I did check. When I get a few minutes I’m going to verify that only the CFG file in my RBGXE directory exists.
Albert > On Dec 4, 2016, at 3:59 PM, A. Razzak Memon <raz...@rbase.com> wrote: > > Are you able to check all settings under configuration option? > > RBGXE > Main Menu > Settings > Configuration Settings ... > > Are you able to change and then save R:BASE Configuration Settings? > > There is always a reason, and NEVER give up on what you really want to do. > > Razzak > > At 05:46 PM 12/4/2016, Albert Berry wrote: > >> R:BASE X, Enterprise, U.S. Version, Build: 10.0.2.11130 >> >> The keyboard is US standard layout. % prints as it did in my original >> message, it just isn’t being treated as a wild card by RBGXE. I just >> checked the settings in parallels, and the keyboard is US mapped to the Mac. >> %%%% < it types just fine, but isn’t a wild card to R:Base. I give up. >> >> >>> On Dec 4, 2016, at 12:42 PM, Alastair Burr >>> <<mailto:adbb...@outlook.com>adbb...@outlook.com> wrote: >>> >>> Albert, >>> >>> Just a thought: >>> >>> When I worked in different countries in Europe, national keyboards were >>> often the problem when some characters went "astray". Often the answer was >>> to use the key in the position of the UK or perhaps more often the US >>> keyboard position. >>> >>> I know nothing about Macs but if the keyboard layout is different is the >>> right letter being transmitted through the Parallels interface? If the >>> asterisk is in a different place you could try using the key that it >>> "should" be. >>> >>> Regards, >>> Alastair. >>> >>> >>> >>> On 04/12/2016 19:14, Albert Berry wrote: >>>> >>>> All the character settings are correct. The wild card just doesn’t work. >>>> >>>> R>show char >>>> BLANK >>>> DELIMIT , >>>> LINEEND ^ >>>> SEMI ; >>>> QUOTES " >>>> PLUS + >>>> SINGLE _ >>>> MANY % >>>> IDQUOTES ` >>>> >>>> Albert >>>> >>>>> >>>>> On Dec 4, 2016, at 11:45 AM, A. Razzak Memon >>>>> <mailto:raz...@rbase.com><raz...@rbase.com> wrote: >>>>> >>>>> Albert, >>>>> >>>>> On your CONNected database, check the database CHARacter settings. >>>>> >>>>> SHOW CHAR >>>>> >>>>> R>SHOW CHAR >>>>> BLANK >>>>> DELIMIT , >>>>> LINEEND ^ >>>>> SEMI ; >>>>> QUOTES ' >>>>> PLUS + >>>>> SINGLE _ >>>>> MANY % >>>>> IDQUOTES ` >>>>> >>>>> In your case, what is the character setting (symbol) for MANY? >>>>> >>>>> That should provide you with some blue's clues ... >>>>> >>>>> BTW, aging (getting old) makes person wiser and experienced, and >>>>> not the other way around, and shall not constitute a complicated >>>>> life for R:BASE users. >>>>> >>>>> Very Best R:egards, >>>>> >>>>> Razzak >>>>> >>>>> >>>>> At 01:09 PM 12/4/2016, Albert Berry wrote: >>>>> >>>>>> >>>>>> I'm working on my new MacBook Air, running Windows 7 Pro under Parallels >>>>>> 12. Commands fail, although the information is there. >>>>>> >>>>>> LIST Contact% — shows nothing. There are 7 tables starting with >>>>>> Connntact in the name in the database >>>>>> LIST TABLE Contact% — still nothing >>>>>> >>>>>> LIST COLUMNS Contact% — still nothing >>>>>> >>>>>> This is not a fatal error by any means, but it makes life a bit more >>>>>> complicated. >>>>>> >>>>>> Albert >>>>>> >>>>>> -- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "RBASE-L" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>>> an email to >>>>>> <mailto:rbase-l+unsubscr...@googlegroups.com>rbase-l+unsubscr...@googlegroups.com. >>>>>> For more options, visit >>>>>> <https://groups.google.com/d/optout>https://groups.google.com/d/optout. >>>>> >>>>> -- >>>>> You received this message because you are subscribed to the Google Groups >>>>> "RBASE-L" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send an >>>>> email to >>>>> <mailto:rbase-l+unsubscr...@googlegroups.com>rbase-l+unsubscr...@googlegroups.com. >>>>> For more options, visit >>>>> <https://groups.google.com/d/optout>https://groups.google.com/d/optout. >>>> >>> >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "RBASE-L" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to >>> <mailto:rbase-l+unsubscr...@googlegroups.com>rbase-l+unsubscr...@googlegroups.com. >>> For more options, visit >>> <https://groups.google.com/d/optout>https://groups.google.com/d/optout. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "RBASE-L" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to >> <mailto:rbase-l+unsubscr...@googlegroups.com>rbase-l+unsubscr...@googlegroups.com. >> For more options, visit >> <https://groups.google.com/d/optout>https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "RBASE-L" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to rbase-l+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > <RBGXE_Configuration_Settings.JPG> -- You received this message because you are subscribed to the Google Groups "RBASE-L" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbase-l+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
