Ok thx. I will play with it some. Dan Goldberg
-----Original Message----- From: [email protected] <[email protected]> On Behalf Of A. Razzak Memon Sent: Tuesday, August 24, 2021 12:39 PM To: [email protected]; [email protected] Subject: Re: [RBASE-L] - reports rounded rectangle Also ... It looks like the "Lance" image is not transparent, which is overwriting the rounded square. You could adjust the rounded square and image layers using the right click "Send to Back" option, to display the rounded square edge. Ultimately, you will need to use a transparent Lance image, so the rounded square is on the bottom layer. Hope it helps! Razzak At 02:32 PM 8/24/2021, A. Razzak Memon wrote: >Dan, > >Adjust and/or correct the actual image to render perfectly on your report. > >Very Best R:egards, > >Razzak > > >At 02:01 PM 8/24/2021, Dan Goldberg wrote: > >>I have a report that I need to have rounded rectangles but when I make >>it full page the rounded part is larger. >> >>Is there a way to change the amount of rounding in a rounded rectangle? >> >>Dan Goldberg -- For group guidelines, visit http://www.rbase.com/support/usersgroup_guidelines.php --- You received this message because you are subscribed to the Google Groups "RBASE-L" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/rbase-l/1MBVVT-1mBDii4BCx-00Cw70%40mrelay.perfora.net. -- For group guidelines, visit http://www.rbase.com/support/usersgroup_guidelines.php --- You received this message because you are subscribed to the Google Groups "RBASE-L" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/rbase-l/2E4830CEC16615458329D3D83342F8D0014E9AA7F2%40EXCHANGE10.
