Razzak, I tried everything you suggested and the command file still will not Codelock properly.
I am using R:Base For Windows v6.5++. Build 1.866xRT03. The command file runs perfect as an ASCII command file. I traced and steped through the command file with no errors. All other command files Codelock and run without any problems. This problem has me stumped! Any more suggestions? Thanks for your help. RB ----- Original Message ----- From: "A. Razzak Memon" <[EMAIL PROTECTED]> To: "RBASE-L Mailing List" <[EMAIL PROTECTED]> Sent: Sunday, December 14, 2003 8:48 AM Subject: [RBASE-L] - Re: Command File That Won't Codelocke! - Razzak'sReply > At 08:16 AM 12/14/2003 -0600, Rick Brown wrote: > > >I have created a command file that will not compile properly. > > > >I have R:Styled the command file and it executes perfectly as an ASCII > >command file. > > > >However, when I try to Codelock the file it goes through the motions but > >the Codelocked > >file is extremely small and will not execute at all. > > > >I know it is not my copy of R:Base because I tried Codelocking other > >command and > >procedure files without any problems. > > > >Could there be some control characters in the file that prevent it from > >Codelocking? > >If so, then how do I locate these control characters and remove them? > > > >Can someone offer any suggestions as to what I might do to get this > >command file to > >Codelock? > > > Rick, > > 00. What Version and Build of R:BASE are you using? > > 01. Does that command file work in its entirety? > > 02. Have you TRACEd the command? Any -ERRORs- > > 03. What happens when you try the Codelock procedure at the > Command Prompt: > > Example: > > CODELOCK 1 AsciiFileName BackupFileName BinaryFileName > > Very Best R:egards, > > Razzak. > > >
